Titanium plate heat exchanger

Product Type: plate heat exchanger Product Description: PAIST plate heat exchanger consists of a set of corrugated metal plates, plate with a hole through the two liquids for heat transfer. Metal plate mounted on the side within the framework of a fixed plate and a movable clamping plate with clamping bolt clamping. Mounted on a sheet gasket, seal the liquid passage and alternately directing the fluid flow into the respective channels. Liquid flow, physical properties, pressure drop and temperature difference determines the number plate size, the chemical properties of the liquid, corrosive characteristics determine the plate and pad material, different design unfair corrugated board increased the degree of turbulence, and forming a plurality of support points, enough to withstand the pressure difference between the media. Metal plate and movable pressing plate mounted on suspension beam by the lower guide rod retention, while the rod end is fixed to the support column, but if one or both of the liquid in the liquid heat exchanger through more than once, the interface should be opened in the fixed plate and activities due to the pressing plate. Corrugated sheet angle with a reasonable size, can greatly improve the heat transfer area of ??heat transfer units, adjust the resistance of the liquid, saving heat transfer area, as a result reduce investment costs and shorten the payback time. PAIST BR series plate heat exchangers have, BP series, BT series, BS series, condenser, evaporator, half welder, fully welded and other major series of hundreds of kinds of plate. Various models have deep corrugations, shallow corrugated, wide-angle, low angle, absolutely sure to meet the different needs of users, special conditions specially designed and manufactured according to user needs. Plate Material: Stainless steel: SUS304,316,316L, 310S, 904 titanium and titanium-palladium alloy: TAi, TAi-Pd Hastelloy: C276, D205, B2G Nickel: Ni200 Molybdenum: 254MO