AJ-D93MC editors

ACl00 to machine voltage AC 240 V ± 10%, 50/60 Hz power 52W Operating temperature 5 ℃ -40 ℃ Humidity 0-80% (non-condensing) Weight 68 kg Size (width X height X length) 214 × 132 × 434 mm (excluding floor and connected devices) recording format DVCPR0 50 / DVCPRO (switchable) video format to record audio signal 625i DVCPR050: 48 kHz. 16 Bit, 4-channel DVCPRO: 48 kHz, 16 Bit, 2-channel recording tracks digital video / audio: helical path TC: subcode area CTL: 1 longitudinal track tape speed 67.708 mm / sec (DVCPR050) Maximum recording / playback Time DVCPR050 format: (when using AJ a 5P92LPMC tape) 92 minutes videotape metal particles coated with the fast forward / rewind time of less than three minutes (when using AJ a 5P92LPMC tape) Digital slow playback speed to the normal speed of 0.43 +0.43 times ( DVCPR050 / DVCPR0) a timing precision tape (CTL continuous mode) video format Sampling frequency Y: 13.5 MHz, Pb / Pr: 6.75 MHz (DVCPR050) quantization bits 8-bit compressed format DV-based compression (SMPTE314M) Compression ratio 3: 1 (DVCPR050) 5: 1 (DVCPR0) error correction code Reed - Solomon code rate 50 Mbps (DVCPR050) 25 Mbps (DVCPR0) digital input / output analog component video bandwidth (Option * 1 * 2) Y: 25 Hz to 5.5 MHz (± 1dB) 5.75 MHz (2 dB) Pb / Pr: 25 Hz to 2.5 MHz (± 1dB) 2.75 MHz (2 dB) SNR> 58 dB K factor <1% Y / Pb, Pr delay < 10 nanosecond video input signal analog part (Option * 1) BNC × 3 (Y / PB / PR) (video input connector) Y: 1.0 Vp-p PB% PR: 0.7 Vp-p, 75 ohms (100 / rainbow ) analog synthesizer (option * 1) BNC × 1, Video: 1.0 Vp-p (75 ohm) Reference (option * 1) BNC × 2 (loop output), analog composite 75 Ohm switch automatic switching SDI (optional * 2) BNC × 1, ITU-R BT 656-4 standard analog video signal output portion (Option * 1) BNC × 3 (Y / PB / PR) (can be switched into a composite output) Y: 1.0 Vp-p PB / PR: 0.7 Vp-p, 75 ohms (100% color bars) analog composite (Option * 1) BNO × 2, a video interface, video interface 2 SDI (Option * 2) BNC × 1, ITU-R BT.656-4 standard monitor is BNC × 1, analog composite video output video gain adjustment range of ± 3 dB ± 3 dB gain output chroma chroma phase output ± 30 ° Output Black Level ± 100 mV output synchronous phase ± 15μs output SC phase ± 180 ° audio parameters Sampling frequency 48 kHz (synchronized with video) quantization bits 16Bit frequency response range of 20 Hz to 20 kHz, ± 1.0 dB (reference level) Dynamic range greater than 85 dB (1 kHz, closed-emphasis, "A" weighted) Distortion of not more than 0% (1 kHz, closed-emphasis, reference level) Crosstalk less than 80 db (1 kHz, between any 2-channel) measurement of jitter is less than 18 db limit headset deemphasized T1 = 50 sec, T2 = 15 microseconds, the switch automatically switch the audio input signal simulation (option * 1) XLR × 4 (channel 1/2/3/4) 600 ohm switchable high impedance +4/0/20 dBu s switchable SDI (option * 2) BNC × 1, ITU-R BT. 656-4 standard analog audio output signal (option * 1) XLR x 4 (Channel 1/2/3/4) low impedance +4/0/20 dBu switchable SDI (Option * 2) BNC × 1, ITU-R BT. 656-4 standard monitor PHONE × 2,600 ohms, 8 dBV headset M3, stereo, 8 ohms, variable level control other input and output signals DVCPRO / DV input / output 6-pin connector × 1 IEEE 1394 digital interface 400/200/100 Mbps switchable IEEEl394-1995, IEC61883-Part1 / Part2 SMPTE396M AV / C Digital Interface refers platform TC input (option * 1) BNC × l, 0.5to 8.0Vp-P, 10 k ohm output TC (option * 1) BNC × 1, low impedance 2.0 0.5 V remote input / output (option * 1) D-sub 9-pin connector Rs a 422A I / F Options * 1 : AJ-YA93PMC analog interface board