Watson air conditioning heating unit mine mine kjz heating unit

Heating unit known mine air heating units, industrial hot air. It is designed for a heating and ventilation equipment industrial and mining development. It is a conventional air heater upgrading of products. Underground mine air heating unit is heating for air heater. Mines heating unit is based on the mine in order to prevent freezing in winter wellbore into the wind, we must need to supply warm air underground, the development of an efficient air heating equipment. Mine air heating unit for wellhead mine air heating, can be used for temperature control in large industrial building and material drying. As efficient finned tube heat exchanger components, the use of CNC equipment around the film tightly wrapped around the aluminum pipe outer wall, the use of efficient thermal conductivity of aluminum, making rapid and uniform heat transfer to the air. Industrial hot air unit is used in a variety of mineral industry-specific equipment, which is set in the outer wellhead master, auxiliary shaft room, fresh air through the winter well wellhead heating air heating unit, added into the underground wellhead so cold northern cold air heated to a temperature above the freezing point, to avoid the wellhead freezing problems and cause safety problems. Heater unit uses the frame plate structure: the panels, aluminum alloy rod qualities, steel-aluminum heater, low noise axial fans, inlet air filter, the air control valve, simple cabinet, black base and other components. Aluminum alloy rod (70 / 70mm), thickness of 2.5mm, the encryption seals. Panel color steel (basket or white) Thickness 0.5mm, the intermediate insulation material 50mm polyurethane insulation boards. 10 # channel steel base is welded, installation does not require anchor bolts. Texas Watson air-conditioning plant specializing in the production of mine heating unit is designed for a new heating and ventilation equipment industrial and mining development, the device performance and stability, long life, high efficiency, high degree of automation, this article will give you a brief introduction about the mine heating introduction of various performance units. Wellhead heating unit is designed for industrial and mining enterprises to open up a heating and ventilation configurations. Traditional ambience heater upgrading of products. This unit is useful in a variety of industrial and mining-air heating, heat medium is 0.2-0.4mp steam, 95-130 / 70 degrees hot water. Rational layout plan, has placed convenience, performance, robust, easy to use handle, saving the results significantly, both elegant appearance, long service life. Wellhead heating unit tensions handle the mine head or on the factory floor, probably due to low winter temperatures icing phenomenon. To make matters ambient temperature control at over 2 ° C, effective antifreeze, to ensure peaceful production. For group-type layout unit. Accepted body frame layout, high-strength metal skeleton profiles, appearance is elegant, easy removal. Box layout should have good thermal insulation, sound insulation, heat resistance of not less than 0.85mK / W. Winter, whether the unit is in operation or in the process of shutdown, the heating coil within the unit possess reliable pace antifreeze. Unit configuration low wind noise high pressure wing mine axial fan, steel distribution, required quality, reliable, long and durable, the fan should have 24 hours / day continuous quiet operation results, the main inclined atmosphere heating unit fan supply: 660V, Deputy Shaft atmosphere heating unit fan supply: 380V. Configuring the drive, modulating air volume based on outdoor climatic conditions to achieve optimal operation held at the same time to ensure the well head temperature.