Power supply 5 kg 5 kg transformer breathers Shu Shu transformer breathers Blue Silicone ..

Breathers by silica gel color can be divided into: white silicone moisture and color gel breathers; according to the functions can be divided into: general (or single-suction) absorbent and dual breathing breathers. Breathers silicone color: white, or blue. Both models divided: 0.2kg, 0.5kg, 1kg, 1.5kg, 2kg, 3kg, 5kg, 6kg, 7kg, 8kg, 10kg of. Breathers dimensions table Model D1 D2 H XD-0.2 80 60 170 XD-0.5 100 76 220 XD-1 140 90 255 XD-1.5 140 90 325 XD-3 200 125 440 XD-5 200 125 540 installed transformer breathers Notes: Before moisture absorbent not absorbent, was blue, bright color breather after loading, easy to observe. If the moisture absorbent draw enough moisture to become white saturated. Changes in duty by silica gel breathers color, to determine whether silicone deliquescence. When the silicone part accounted for more than one-third of the whole, it should be replaced. When replacing the silica gel, it should pay attention to the role of the following aspects: (a): (1) Replace the silica gel should be in fine weather, and keep a safe distance from live parts. (2) into the amount of colloidal silica to account for two-thirds of the volume of breathers appropriate. (3) silica gel can be used for down tablespoons stir heating and drying, it can continue to be used, in order to reduce operating costs. (4) the application of the oil cup oil replacement, and enough qualified new oil. (5) should be re-gas protection reroute signals (6) Remove the breather tube should be even blocked, preventing the recovery of air (7) replaced the dry silica gel, it should not make the oil seal over the mouth of breath within breathers and sealed. (B) In 1, the installation of moisture, be sure to check the installation should be stored or transported in a moisture-proof pad and installation of non-porous and moisture agent removed. 2, disassemble breathers, first unscrew the bottom of the bowl seal, remove the upper oil pillow with tube or diaphragm hose connection, remove the breather, the disintegration of the breather, pour internal moisture absorbent. 3. Check the breathers glass tube should be intact without damage, the body of 4 should be sealed, breathers should oiling bottom seal to the oil line, no line of oil through the oil inlet port to the above, in order to play Seal filter effect. 5, blue color gel, such as red and damp is invalid, should at a temperature of 115 ~ 120 ℃ dried for several hours, was sky blue again available. 6, discoloration silica manufacturing, taking account silica 3% cobalt chloride, dissolved in water, the particle size of 2-6mm white silica being immersed in the solution, remove pink at a temperature of 115% ~ 120 ℃ By drying, was sky-blue can be used. 7, when the operation of the transformer replacement silicone transformer gas protection to quit running adapt to the environment: -30 ~ 43 ℃; ventilation resistance: ≤0.01Mpa; adsorbent material: 75% of the pores of silica gel, silica gel 25% color, material particles φ2 -6mm; adsorption capacity :( at a temperature of 20 ℃) ??No. Model No. Model Remarks Remarks 1 0.2Kg equipped with the following distribution transformer 80KVA 8 4Kg 31500KVA equipped with the following main transformer 2 0.5Kg 200KVA equipped with the following distribution transformer 9 5Kg equipped with 50000KVA The following main transformer 3 0.7Kg equipped with the following distribution transformer 200KVA 10 6Kg 100000KVA equipped with the following main transformer 4 1Kg equipped with the following distribution transformer 630KVA 11 7Kg 180000KVA equipped with the following main transformer 5 1.5Kg equipped with the following 2000KVA distribution transformer 12 8Kg equipped with 300000KVA about 6 2Kg main transformer is equipped with the following 3150KVA distribution transformer is equipped with about 13 10Kg 500000KVA main transformer 7 3Kg 10000KVA equipped with the following main technical parameters change: adapt to the environment: -30 ℃ -43 ℃ ventilation resistance: ≤0.01Mpa adsorbent material: pore 75% silica, silica gel 25% color, material particle diameter 2-6mm common matching transformer breathers list absorbent Model Transformer models 0.2kg 80kvA less applicable variable 0.5kg 200kvA with the following distribution transformer 1.0kg 630kvA the following distribution transformer 1.5kg 2000kvA The following distribution transformer 2.0kg 3150kvA the following distribution transformer 3.0kg 10000kvA the following distribution transformer 4.0kg 31500kvA the following distribution transformer 5.0kg 50000kvA the following distribution transformer 6.0kg 100000kvA the following distribution transformer 7.0kg 180000kvA the following distribution transformer 8.0kg 300000kvA the following distribution transformer 10kg 500000kvA the following distribution transformer