468-2FC solvent-free impregnating varnish

468-2FC solvent-free impregnating varnish 468-2FC coils, transformers impregnated with a solvent-free high pressure and temperature resistant insulating resin Features: 100% pure resin, no pollution problems caused by the solvent evaporation. 2, high flash point (225 ℃) Save safe, no fire explosion hazard. 3, completely fill the gaps after hardening transformer or coil, good insulation, structural strength, excellent thermal conductivity, can reduce the temperature rise or noise problems. 4, in line with UL1446 / IEC85B level (130 ℃) to the S-Class (240 ℃) all insulation systems. 5, in line with MIL-I-24092B. Properties: Color: Light amber hardening time: 120-150 ℃ xhr-8hr ◎ duration of hardening due to part size, resin film thickness and oven efficiency vary Viscosity: @ 25 ℃ 350pcs @ 93 ℃ 10pcs Thickness: 0.64 bar (For higher film please send by 468-2FCTXC) Solid content: 100% Hardness: 35 SHORED dielectric strength: 2200Volt / mil arc resistance: 93 seconds shrinkage: 0.08% anti-micro: through water absorption: 0.07% Tensile strength : 4800PSI Elongation: 8.5% thermal conductivity: 0.21 BTU / HR / FT / FT / F Shelf life: over @ 35 ℃ 3 months @ 23 ℃ 6 months @ 0 ℃ 2 years ◎ If refrigerated storage, the need to reply at room temperature before Opening barrels, or water vapor will condense into 468-2FC, resulting in poor quality. Flash Point: 225 ℃ Gel time: 120-150 ℃ × 15-60 minutes