Henan Xinquan power transformer factory _ coupled multi-winding transformer Transformers function

Wound core distribution transformers (S11-M series 10KV) main function 1, core: core wound core distribution transformers with a thickness of 0.30mm or 0.27mm cold-rolled silicon steel sheet orientation, using ladder-type wound core seamless structure, In the core winder roll is made, the first winding 2 small box-shaped core, and then in two small box-shaped core roll out a large box consisting of a three-phase wound core, after the roll is completed, and then into the core annealing furnace, vacuum and nitrogen annealing, its core properties can be fully restored, so that the series transformer no-load loss is very low, with an average 30% lower than the no-load loss S9 series 10KV distribution transformer level, which is a better low-loss distribution transformers. 2, the coil: wound core transformer coil winding requires a special winding machine, directly on the core winding is complete, high and low voltage coil wound simultaneously, and without the use of wire mold. 3. Assembly: When assembling, no longer need to disassemble the yoke core, the core loss can be prevented in the assembly process increases the phenomenon. 4. Tank: iceberg distribution transformers used in all types of corrugated sheet sealed. Civil Rights Xinquan Special Transformer Factory's official website: http: //www.xqbyq.com Sales Tel: 0378-3689563 15937858399 (Zhang) Welcome to inquire, discuss business!