none factory direct copper terminals quality assurance price concessions nose

 Nose, also known as wire copper nose, copper wiring nose, nasal copper tube, terminals, etc., local and industry is called mixed. Wire and cable for electrical equipment connected to the connector on the top side of the fixing screw on the side, the end of the wire and cable copper conductor after stripping. More than 10 square copper nose only, not less than 10 square wire copper nose, use nasal cold line. Tin-plated copper nose and not tin, tube compression and blocking oil-of-hours. The main scope of application: household appliances, electrical industry, mechanical equipment factory, shipyard, power distribution cabinet distribution boxes. Specifications good appearance, good conductivity and safe. Model 1: DT, is made of T2 copper, product appearance as a spatula round, can be used to seal blocking oil, to the top side of the fixing screws used, the end is inserted into the cable after stripping can be pressed with terminal clamp . Model 1: DTG, is stamped from brass from T2, weight slightly lighter than DT, when it is not connected Seal oil can replace DT. Workmanship is simple and quick ratio DT, the price would also like to cheap. Use the same DT, surface treatment: There are two commonly used, a pickling, pickled copper color and the true nature of the same, can play a more beautiful and beneficial antioxidant conductive. 2, tin, tin-plated copper nose after the silver-white, to better oxidation resistance and electrical conductivity, and prevent harmful gases generated in the conductive copper had diffused into