Hakusan Hakusan IF frequency electric furnace brand _ regular factory

Hakusan Hakusan IF frequency electric furnace brand _ regular factory frequency electric furnace open Procedure 1. To check the good electrical equipment, water cooling systems, brass and other sensor is intact, or prohibiting the opening of the furnace. 2. loss exceeds the melting furnace should be repaired. Prohibited in the melt loss through the inner deep crucible melting. 3. Transmission and furnace should be specifically responsible, after power non-contact sensors and cables. On duty were not allowed to leave their posts, pay attention to the sensor and the crucible external circumstances. 4. When loading, you should check whether the explosive charge within the mixing and other harmful materials, if any should be removed, non cold and wet feed material directly into liquid steel, the molten liquid filled with large pieces of material back to the upper non-join to prevent the knot cover. 5. fettling and non-pound crucible, iron oxide mixed rolling, pound crucible must be dense. 6. Venue and pouring furnace pit should be no obstructions, no water, to prevent the steel floor explosion. 7. The molten steel is not allowed dressed too full, the hand bag pouring station, the two should cooperate has been walking steadily, Jizou not allowed to stop, after pouring more than steel to be poured into the designated location, non-Dumping 8. IF power room inside should be kept clean, non-inflammable and explosive materials and other debris into the room, no smoking. The company has more than in the automation of senior technical staff, with strong technical force, a strong after-sales service network and first-class service personnel. Site installation, commissioning, one year free maintenance, lifetime warranty Hakusan Hakusan IF frequency electric furnace brand _ regular factory