Oil tank level sensor remote level indicator UT-81A

Oil tank level sensor / remote level indicator (± 400mm, 4-20mA output) Model: UT-81A instrument Information: UT-81 series oil tank level sensor, non-corrosive liquids site, ideal for remote level measurement instructions devices. Long-term, especially in the turbine oil tank measurement, widely used. UT-81-type remote level indicator, a device includes two operating modes, float buoyancy in the liquid, the direct promotion of the center rod, the rod fitted in the upper part of the red pointer, a direct indication of the level, and clear surface, depending on the away from the big, easy to observe; In addition, the center pusher when moving up and down, driven auxiliary rod, so that the lever at the top of the armature movement in intermediate frequency source excitation coil, the coil voltage is changed, by the second detector instrument amplification, will float up and down displacement of the float into a linear power, so that remote level changes to the control room. UT-81 type liquid level indicator points A, B, C three forms. UT-81A Type: Submersible Level Indicator (upper part of the installation instructions of running layer, the lower part of the installation floats in the tank cover, the intermediate connection with extensions). UT-81B type: Straight level indicator (installed in the tank, the bottom indicator has piping and tank connection). UT-81C type: straight immersion level indicator (also known as A, B binding type, you can use the indicator flange mounted directly on the tank cover). Technical Specifications: 1. Range: ± 100mm ± 200mm ± 300mm ± 400mm (scale custom by the user) 2. Reference weight: A type: ± 200mm about 35Kg B type: ± 200mm about 40Kg C type: ± 200mm approximately 48Kg 3. the liquid being measured: a variety of turbine oil; for other non-sticky, non-highly corrosive liquid level measurement of liquids, the counterweight can be adjusted to suit. 4. Accuracy: ≤ ± 3mm (full scale) 5. measured the highest temperature of liquid: <85 ℃ Ordering Guide: Selection Code: UT-81-A □□ -B □□ selection Description: Sensor Selection A □□ : 01 * - 81A; 02--81B; 03--81C measuring range B □□: 01-- ± 100mm; 02 * - ± 200mm; 03-- ± 300mm; 04-- ± 400mm