Promise of SMD aluminum electrolytic capacitors RVN series

About SMD aluminum electrolytic capacitors patch electrolytic capacitors are one electrolytic capacitors, aluminum electrolytic capacitors currently divided into two kinds, one is a plug-in electrolytic capacitors, one is SMD aluminum electrolytic capacitors. The main difference is that the installation and size. Conventional plug bulky electrolytic capacitors, required labor to install, thus resulting in a large volume of product, production efficiency is low. The SMD electrolytic capacitors, small size, you can use the patch installed. High efficiency, low labor cost, more compact product. Its products are mainly used for power filtering, signal filtering, signal coupling, compensation, charge and discharge, storage, resonance, filter, DC-blocking other circuits. Common specifications and dimensions 100UF-16V-6.3 * 5.4 47UF-50V-6.3 * 7.7 10UF-16V-4 * 5.4 100UF-10V-5 * 5.4 220UF-16V-6.3 * 7.7 10UF-50V-5 * 5.4 47UF-16V -5 * 5.4 470UF-6.3V-6.3 * 7.7 100UF-25V-6.3 * 7.7 220UF-10V-6.3 * 5.4 470UF-16V-8 * 10.2 4.7UF-50V-4 * 5.4 100UF-35V-6.3 * 7.7 220UF- 50V-10 * 10.5 220UF-25V-8 * 10.2 220UF-6.3V-6.3 * 5.4 47UF-25V-6.3 * 5.4 1UF-50V-4 * 5.4 100UF-50V-8 * 10.2 470UF-25V-10 * 10.2 22UF- 16V-4 * 5.4 2.2UF-50V-4 * 5.4 Operating temperature range: -55 ℃ ~ + 105 ℃ 2000 小时 rated, non-polar patch electrolytic capacitor operating voltage: 6.3V ~ 100V DC electric capacity range: 0.1uf ~ 1500uf Capacitance tolerance: ± 20% (. 120HZ 20 ℃) ??Size Case diameter:. φ4 * 5.4, φ5 * 5.4, φ6.3 * 5.4, φ6.3 * 7.7, φ8 * 10.2, φ10 * 10.2 et fit . for reflow Reflow soldering is available for high-density mounting showed Available for high density surface mounting.ROHS Directive (2002/95 / EC) Adapted to the ROHS directive (2002/95 / EC) Applications: apply to high-end audio and monitoring products, consumer electronics products