High voltage capacitor demagnetization machine

MFO, MFD series metallized film pulse capacitor Specification Overview: "Seif card" metallized film pulse pulse (storage) capacitor can be charged in a long time, but in a very short period of discharge, thus forming a huge pulse power. Pulse power of acquisition is set by the pulse capacitor charged through the main reactor discharge obtained short-oscillation, and the pulse capacitor bank is not before the test by the power charging device, with a longer time to charge, discharge oscillation only several tens of milliseconds, thus greatly improving the test power supply power ratio, improving the economic efficiency. Applications: Widely used in magnetizing machine, demagnetization machine, laser power, medical equipment, energy storage welding machine; DC high voltage equipment, rectifier filter device oscillation circuit, continuous pulse device, impulse voltage generator, the impact of current generator, impact dividers and other non-continuous pulse device. Main features: Stable high vacuum oiling good heat dissipation performance reliability and low power consumption, suitable for high-power, high current, high voltage, high surge applications; with the best capacity and volume performance ratio; high thermal conductivity,??? varies with temperature, long life;? anti-peak voltage up to the maximum;? high energy, high pulse current capability;? Good self-healing properties, stable performance;? low inductance, low ESR;? shell made of stainless steel or cold-rolled plate, easy to install. ? The main technical parameters: Capacity range: C = 100μF ~ 6000μF; Capacitance Tolerance:? General ± 5%, may be smaller in accordance with the requirements; Rated voltage:? Un = 1KV ~ 5KV; ESR:? ESR≤5mΩ trans? peak voltage of up to 80%; charge and discharge times:? up to 20,000,000; loss tangent:? tgδ≤0.002 (100Hz); use of ambient temperature width:? -40 ℃ ~ + 75 ℃; use? Location: anywhere; use standard:? JB / T8168 or customer requirements. Main product specifications: Model Voltage (KV) Capacity (μF) MFO (D) 1K001007 1.0 1000 MFO (D) 1K002007 1.0 2000 MFO (D) 1K005007 1.0 5000 MFO (D) 1K205006 1.2 500 MFO (D) 1K201007 1.2 1000 MFO (D) 1K202007 1.2 2000 MFO (D) 1K505006 1.5 500 MFO (D) 1K501007 1.5 1000 MFO (D) 1K501507 1.5 1500 MFO (D) 1K602006 1.6 200 MFO (D) 1K605006 1.6 500 MFO (D) 1K601007 1.6 1000 MFO ( D) 1K601507 1.6 1500 MFO (D) 2K002006 2.0 200 MFO (D) 2K005006 2.0 500 MFO (D) 2K001007 2.0 1000 MFO (D) 2K205006 2.2 500 MFO (D) 2K201007 2.2 1000 MFO (D) 2K502006 2.5 200 MFO (D ) 2K505006 2.5 500 MFO (D) 3K002006 3.0 200 MFO (D) 3K005006 3.0 500 MFO (D) 4K002006 4.0 200 MFO (D) 4K005006 4.0 500 MFO (D) 4K502006 4.5 200 MFO (D) 4K505006 4.5 500 MFO (D) 5K002006 5.0 200 MFO (D) 5K005006 5.0 500 The above information is based on user requirements, we can design and manufacture other specifications of the pulse capacitor.