Batteries for UPS

VRLA battery maintenance procedures when (1) the use of plug-in terminal battery, it is recommended to use the jack wiring connected thereto, forced to use iron solderless terminals Please http://www.whmayca.com/mayca/adminW The soldering iron within 5 seconds. Do not bend the terminals. (2) the use of UPS converters, etc., please pay attention to avoid backflow current from the converter. When used as an emergency power source in the general UPS, telephone switches, should give special consideration to its reliability. Recommend the following replacement timing (according to the ambient temperature of the average battery, decided to replace the period): temperature of the battery replacement during the 20 ~ 25 ℃ (room temperature) within three years from 30 ℃ within 2.5 years less than 40 ℃ 1 4 years than to replace the battery Period. Do not (power) to use, due to the reduced capacity and the leakage can cause power outages, fire, explosion. (3) Do not close to the fire and short-circuit. (4) Do not disintegrated. Also when the battery is damaged, sulfuric acid splashed on skin or clothing, immediately rinse with water, such as into the eyes, there is water washed immediately after receiving medical treatment. (5) batteries, such as stained water will lose its function. Please do not watering or into the water. Do not put the fire, there is the risk of rupture. (6) mass disposal of used batteries, please contact the company. Do not mess abandoned, because it will pollute our environment. Advantages 1. Sophisticated materials: the main material imported, such as: import O-ring, terminal, sealants. 2. Battery case for Taiwan-funded enterprises produce, like "porcelain" - like luster. 3. Unique electrolyte additive technology, battery resistance to overcharge, over-discharge ability. 4. Unique lead - calcium - silver alloy and a special plate design, with long battery life and optimal discharge characteristics. 5. Mosaic terminal, use more convenient and reliable connection. 6. The battery case cover with heat-sealed connections, high efficiency, good sealing, more beautiful surface. 7. The unique patented leak-proof technology, anti-leakage, no flatulence and deformation, the battery can be placed in any direction using. 8. The internal battery is connected through the wall, lowering resistance, greatly improving battery performance. Applicable to the telephone exchange ⑺ ⑴ ⑵ office automation systems and electrical equipment, medical equipment and instruments, computer ⑻ radio communication system ⑶ ⑷ uninterruptible power ⑼ emergency lighting power transmission station, switch control and emergency lighting ⑽ portable appliances and mining system ⑸ fire protection, safety and ⑾ alarm monitoring traffic and beacon lights ⑹ automotive batteries and marine starter