CC2500 wireless bonding module

CC2500 wireless bonding module performance and features (1) Operating voltage: 1.8V ~ 3.6V, recommend 3.3V, but can not exceed 3.6V (2) 2400-2483.5 MHz of the ISM and SRD band, license-free use (3) Highest work rate 500kbps, support 2-FSK, GFSK and MSK modulation (4) High receiver sensitivity (under 1.2kbps -104dBm, under 10kbps -101dBm, 250kbps at -90dBm, 1% packet error rate) (5) Built-in hardware CRC error detection and multipoint communication address control (6) low power consumption: TX: at 0dBm to 21.2mA RX: at 250kbps is 13.3mA; (7) Programmable output power, maximum output power of 0dBm The minimum -10dBm, the data rate can vary between 1.2kbps to 500kbps. (8) to support low power electromagnetic activation function, external interrupts, external interrupt or RTC wake-up system (9) to support automatic cleaning before transmission channel access (CCA), namely carrier sensing system (10) fast frequency synthesizers bring change Suitable frequency hopping system (11) software module can be set address, software programming is very convenient (12) semi-hole standard interfaces for embedded applications (13) Separate 64-byte RX and TX data FIFO (14) Few external components, high reliability (15) module visible straight line communication distance 30 m -60 m (16) Module size 18.5mm * 12mm (PCB-board antenna), you can customize other volume modules (provided there is a certain amount) (17) This module large, cheap, very suitable amounts of consumer products