Supply lines UTPCAT6A

Structure Description:???? ☆ single soft copper conductor ??? ☆ Optional insulation (solid polyolefin, chlorine-free low smoke flame-retardant polyolefin) ??? ☆ optional jacket material (PVC, low Smoke-free chlorine retardant polyolefin, fluoropolymer) ☆ ☆ choose Ripcord selectable line for several technical parameters:????? Type of Conductor diameter (mm) Insulation Diameter (mm) cable diameter ( ?? mm) CAT6 UTP 4 0.57 1.03 6.2 CAT6 UTP 8 0.57 1.03 6.2 References:?????? UL758, UL1581, UL444, TIA / EIA-568 ?? CSA C22.2, ISO / IEC 11801 YD?? / T1019-2001 electrical properties (electric capability):?? ????????????????????????? DC resistance unbalance (Unbaiance of DCresistance) ≤2.5 % ???? insulation resistance (Insulated resistance) ≥5000MΩ · km ???? Capacitance (Work capacitance) ≤5.6nF / 100m ???? line-to-ground capacitance unbalance (Unbalance capacitance between wrie and earth) ≤330pF / 100m ???? cable installation temperature (Temperature for dixing cable): 0 ~ 50 ℃ frequency requirement impedance (Ω) maximum attenuation (dB / 100m) NEXT (dB) Worst maximum DC resistance (100m / 20 ℃) 1MHz 85 ~ 115 2.1 64 9.38Ω 4MHz 4.3 55 10MHz 6.6 49 16MHz 8.2 46 20MHz 9.2 44 31.25MHz 11.8 42 62MHz 17.1 37 100MHz 22.0 34 250MHz 18.8 30 Uses: ????????? digital communication ??? level of user communication leads to relatively cables, due to the building cabling system Workspace communications extraction wiring between the patch panel and the transfer between end and end residential cabling system wiring between the patch panel, in order to to meet the different needs of users, this cable shielding and unshielded, shielded cables plus when in use from outside interference and reduce errors, shielded cables are generally used in hospitals, telecommunications, airports and other places. Standard wiring length of these lines is 90m, the general T568A or T568B installed. ? Use: ??? ????????? digital communication horizontal than the cable, due to the building cabling system Workspace communication leads to patch panel cabling between the end and the transfer between and residential User communications cabling system patch panel cabling between lead end, in order to meet the different needs of users, this cable shielding and unshielded, plus the use of shielded cable in from outside interference will be reduced errors, shielded cables are generally used in hospitals, telecommunications, airports and other places. Standard wiring length of these lines is 90m, the general T568A or T568B installed. ?