Commentary rfid reader Workflow

 Commentary rfid reader workflow for reader you should be very familiar with it, and now there are a lot of people are using the reader does, although we use the reader more, but the workflow for everyone in the reader may not So understand it, Jiangsu Shen Lida Intelligent Technology Co., Ltd. as we explain what rfid reader workflow. We use a certain frequency reader is sent by the transmitting antenna RF signal, when the radio card into the work area when the transmitting antenna will produce induced current, radio frequency card will be activated for energy, radio frequency card will own coding Information sent by the card to the built-in antenna and then sent out to the antenna system receives information sent will be received from the radio frequency to send cards to the carrier signal is transmitted through the antenna adjustment to our use of the reader above, the reader have received signal is demodulated and decoded, and then sent back after some processing related to the host system, the host system will determine the legitimacy of the card, according to the logic operation, generally for different setting will make the appropriate treatment and control, an operation command signal to control the actuator. Rfid reader is directed to the workflow to introduce here, if you read our article where after there do not understand, you can call us, we have the most professional staff here, one by one we answer yet, I hope you can always support us, we will continue to follow-up efforts. The above article is absolutely original, please indicate the source if reproduced from the original link: http: //www.sld-rfid.com/gongsixinwen/60.html reproduced Date: April 18, 2015