Import CSC core CK778060CM127125CS229060

? Korea CSC core --MPP, high flux, sendust, Fe-Si alloy Name: magnetic core saturation magnetization:? 7000-16000T initial permeability:? 26,6075,90,125μ squareness:? 000? coercive force: 000 (A / m) KA / m Curie temperature:? 450-700 (℃) ℃ Korea CSC core --MPP, high flux, sendust, Fe-Si alloy Korea CSC --- Sendust (Kool) composition; 85% iron (Fe), 9% of silicon (Si), and 6% aluminum initial permeability: 26,60,75,90,125 saturation flux density: 10000G frequency range: - -2MHZ Curie temperature: 500 ℃ CSC Kool, a low magnetic loss, relative saturation characteristics?. Ideal for power factor correction circuit, and a unidirectional drive applications such as pulse transformers and flyback transformers. Because near-zero magnetostrictive, Kool core application in the filter, is a good material to eliminate noise! In terms of magnetic loss, compared to other iron core is much lower! Especially the E-type sendust core, compared to the open gap of ferrite E-cores, with better storage results! At the same time the E-type Kool also greatly improved the open gap losses and eddy current losses in most applications !! Kool switching regulator inductors, linear noise filters, pulse transformers, flyback transformers and so on. Korean CSC - High Flux (high flux) components; iron-nickel alloy Initial permeability: 26,60,125,147 saturation magnetic flux density: 15000G Frequency range: - 1MHZ Curie temperature: 500 ℃ high flux core, having The saturation magnetic flux density of up to 15000G, which makes the magnetic core having excellent performance and better storage permeability. Good DC bias characteristics and low magnetic loss, not only reduces the number of coil, and has better magnetic properties. High Flux cores on CSC, in PFC reactors and switching regulator inductors, linear noise filters, pulse transformers, flyback transformers, etc. products are the best choice! And core shape and diverse, but also provides more solutions for developers! ? Korea CSC - Mega Flux (Fe-Si alloy) components; iron silicon (6.5%) alloy initial permeability: 26,60,75,90 saturation flux density: 16000G Frequency range: - 1MHZ Curie temperature: 700 ℃? Mega Flux cores, known as Fe-Si alloy, is leading in recent years, CSC developed a new material! In the design and development, a breakthrough leap! This material can achieve small size, current, energy storage demands! Mega Flux can achieve the highest saturation flux density! Magnetic flux density can be achieved 16000G, 15000G higher than high magnetic flux density of the magnetic flux! Of course, more than sendust 1000G! But also to achieve the best DC bias characteristics! Excellent DC bias characteristics, in the application of high-end products, giving a better solution! For example, in the high-current supply systems used (buck / boost) the lifting of the piezoelectric sensor for smooth choke on the inverter, the reactor used in the motor car car! And low core loss than iron core, and no heat aging. I Secretary for South Korea CSC authorized domestic agents, conventional materials have a large inventory spot, timely delivery and price concessions, please call to discuss. Tel: 13450685089 Mr. Zhang immediate QQ: 1506054061