Tape machine filter machine

Machine tape filter, is the use of filter paper (also known as non-woven fabric) of the filtration, the metallic and non-metallic impurities from the cooling liquid separated out, to ensure the cleanliness of the cutting fluid. Its filtering accuracy depends on the density of the filter paper, the user can select different filter paper according to different requirements, filtration precision of up to 15-40 m. The series filter filtering effect of up to 98%, automatic control, a variety of supporting the ideal grinder attachment. The flat mesh belt filter ADF, also known as paper filters, machine tool coolant filter according to pre-set work, can provide automated operational processes and lower consumption of consumables. The workflow is constantly flowing through contaminated liquid to be filtered by the conveyor belt holding the filter paper (can be disposable filter paper, but also use other durable filter material), when the filter surface impurities accumulate overlay, so that the liquid capacity declined, making the level gradually increased, when the level rises to the set height limit switch issuing the order to start decelerating the motor driven conveyor belt moves forward period (about 20 cm), a dirty filter paper is fed into the trash. While the new filter material is automatically expanded, then the level drops, begin the cycle anew. The net liquid stored in the tank to fight back the machine by a pump. In certain situations, you can use a special filter paper tape gravity. For example, the process can be designed to operate without manual control of the motor drive manual paper feed only apply in a small flow, intermittent use, more sensitive to the cost of the budget situation, simple operation, low cost, can achieve the ADF same filtration accuracy. This situation can also remove the conveyor belt, the use of filter paper in the filter plate below the curved erection, can better reduce expenses.