Fiber optic cable connector box ADSS fittings aluminum connector box factory

Highly recommended: The company produces aluminum connector box, anti-corrosion, waterproof, dustproof, shock, long life, excellent prices. Easy to install, is a continuation of the box for the upgrading and construction unit of choice for the construction of fiber optic lines installed, welcomed the new and old customers to buy! Product name: aluminum alloy rod connector box Brand: Lite Lai Model: GJS-based processing or not: Yes Dimensions: length 498mm, an outer diameter of 201mm, 180mm inside diameter of holes: 2 hole, 3-hole, 4-hole, 5-hole 6 hole maximum cable diameter: 22mm maximum joint core number: 144 core compressive strength: 15KV Scope: ADSS / OPGW cable Uses: This product is suitable for connection protection ADSS, OPGW cable joints. Structural features: 1 cable connector and excess length using feeding chip memory defibrillators, joint protection in the form of heat-shrinkable tubing reinforcement 2. The joint box with seals and silicone seal, simple operation can be repeated open, easy maintenance. 3. According to the requirements of the cable connector box joint, with a special tower or pole with a fixed mount. The deposit fibers and aluminum frame, the use of more lightweight, plastic stent fracture avoid accidents. 5. The intake nozzle and precise machining, the sealing performance has been greatly enhanced, avoiding fiber damage. 6. alloy shell with electro-chemical process, corrosion resistance, and excellent performance. Technical indicators: 1 full length 498mm, an outer diameter of 200mm, an inner diameter of 180mm. 2. Temperature performance: -40 ℃ + 60 ℃. 3. Dielectric strength: 15KV DC, 2 minutes without breakdown. The seismic performance: 10 six times. 5. The sealing performance: 100kpa, 72 hours, and the pressure constant. 6. The maximum cable diameter 22mm, maximum joint core number 144 core. 7. life of 50 years. Ordering Information: 1 Number of cable core. 2. few into a few out and the corresponding cable diameter. 3. sub-lever and tower in two, as a lever, you need to provide the shank diameter.