Xi'an City DELHI long Supplying HR-2D synthetic coolant

[Composition] HR-2D synthetic cutting fluid by different water-soluble anti-rust agents, antibacterial agents, anti-wear agents, oiliness agents, extreme pressure agents, defoamers and anti-hard agent components. [Performance and Features] l This product is water-based liquid is completely transparent, not oil, can save a lot of energy. l with excellent cooling, anti-rust, lubricating, cleaning performance, and excellent resistance to hard water. l Long run corrosion machine tool and workpiece, improving working conditions, easy to observe the process, using no adverse effects on the skin. l effluent does not exceed the national standards, it is conducive to human health and the environment. l has good chemical stability, non-toxic, tasteless, non-perishable smelly, life cycles, at least six months or more, in general, careful use of up to several years without deterioration. Emulsion is generally 10 to 20 times the life. Rough finish [use] l This is suitable for turning, milling, grinding, drilling, sawing, pulling, tapping, reaming and other equipment. Emulsified oil can replace oil-based and partly by cutting fluid. l can be used for inter-process rust fluid. l especially suitable for machining centers, combined machine tools and cutting production lines, the use of higher grade. It has been in a variety of processing equipment imported high-grade imported successfully replaced the cutting fluid. l of difficult materials also have very good cutting results. [Use] l concentration is generally 2-5%, if used for tapping, reaming concentration should be 10%, diluted with tap water can be used after stir evenly. Special processing and machining difficult materials concentration can be increased as appropriate. Generally the higher the concentration, the more excellent lubricating anti-corrosion properties. l use reduction by the use of natural density to add continuously. [Caution] l Use emulsification oil and other oil cutting fluid machine. The FDA should cool lathe case and in other parts of the line flushed with water clean, prevent other cooling liquid from mixing but influence performance. l The product should not be mixed with other chemicals, or easy to produce corrosion, seriously affecting the results, the occurrence of this phenomenon, the liquid replaced, reconstituted to l This product should be stored indoors. l When using this product, and use of other coolants should be the same attention to strengthening the protection of the machine according to regulations. [Tips] true solutions l product is water, so the higher the concentration the more significant. The use of the device is inevitable that cleaning is not clean debris, and thus affect the results. Therefore, we recommend first using this concentration is preferably slightly higher in order to overcome the adverse effects, ensure the normal use. Due to the holiday or other reasons, the device within 15 days of when suspended, to ensure that equipment does not rust, no rust oil coating, simply pour the product liquid can be applied to the exposed metal parts, thus enabling device again more convenient, and more savings. [Package] l 200kg iron drum. Or customized packaging.