Bluetooth hands-free phone can connect to two phones Chinese voice prompts newest

Bluetooth hands-free phone can connect to two phones Chinese voice prompts newest Bluetooth hands-free phone can connect to two phones Chinese voice prompts newest 1. Introduction This product is a portable Bluetooth speakerphones, can be used to the car Different environment office, home, etc., can wirelessly connect to most Bluetooth-enabled mobile phones to make high-quality speakerphone, this product uses digital signal processing technology, with echo cancellation and voice sound suppression function. Bluetooth hands-free phone can connect to two phones Chinese voice prompts the latest Bluetooth wireless technology Bluetooth technology is an open standard for wireless data and voice communications, universal 2.4GHZISM (industrial, scientific, medical) band, which to close wireless connectivity based on the establishment of a fixed connection with a particular mobile device communication environment. Two or more connections to achieve the Bluetooth device within 10 meters. Bluetooth hands-free phone can connect to two phones Chinese voice prompts newest speakerphone charge (1) in the first use of the free advance, please for free mentioning the battery is fully charged. The charger AC PIN into an AC outlet, the outlet end of the charger into hands-free charging jack, the output of the hands-free full charge after a handsfree set aside charger charging connector and the charger is removed from the AC outlet . (2) Charging time: normal battery charging time is about three hours or so (3) Charge indicator: Hands-free charging long bright red LED when the speakerphone is fully charged red LED goes out. Bluetooth hands-free phone can connect to two phones Chinese voice prompts newest Notes: (1) to give hands-free charging for a long time if you do not use hands-free or speakerphone battery is exhausted, the hands-free charging indicator LED It may be delayed a few minutes to light. (2) If the battery voltage indication, if not for some time to recharge the battery, speakerphone will automatically shut down. Bluetooth hands-free phone can connect to two phones Chinese voice prompts latest On / Off (1) Power: In the off mode, press "MFB" button for 3 seconds, the speakerphone will go into boot mode, a voice prompt "; Power"; (2) Off: In standby mode, press "MFB" button for 3 seconds, the speakerphone will go into shutdown mode, hear three "beep" and voice prompts "; Shutdown"; Bluetooth hands-free phone can connect to two phones Chinese voice prompts the latest pairing to mobile phone use before the first hands-free, you must be paired with a mobile phone with Bluetooth and the Bluetooth hands-free connection with two mobile phones simultaneously. If you want a Bluetooth hands-free phone is connected only with one pair, you only need to connect once, if you want a Bluetooth hands-free phone is connected only with two pair, you need to connect the two, the following is the connection pairing steps: A. Pairing with a mobile phone connection: (1) the handsfree and the phone on the position 1 m apart within. (2) determine the speakerphone is turned off. (3) Press the hands-free "MFB" button for 6 seconds until you hear a "beep" sound, and the red and blue LED flash alternately; in this case is about to enter pairing state and the voice prompt "; ready to pair"; (4 ) Activate Bluetooth phone function, the phone began to look for a Bluetooth device (For details, see the phone instructions). (5) From the phone is searching for the device to select "BT Speaker" (6) mobile phone input identification code "0000" and press OK to make your handsfree match, when the match is successful, handsfree speaker uttered "beep "sound and voice prompt"; phone 1 to connect "; After a successful match handsfree into standby mode, the blue LED flashes once every three seconds. (7) Press the Return key to return the phone to the phone main menu, determine handsfree spacing of 10 meters and free of obstacles, then you can answer the phone and dial by speakerphone calls. NOTE: If the hands-free state 2 minutes into the match unpaired successful, handsfree will automatically shut down, re-paired according to the above method. B. Pairing two mobile phones simultaneously connected: 1) When the first Bluetooth hands-free mobile phone connection is successful, turn off the Bluetooth hands-free (this step is very important!). 2) Then press the "MFB" button 6 seconds, you will hear a handsfree speaker uttered a long "beep" sound, while the red and blue LED flash alternately, then wait for hands-free phone connection with the second. 3) The next step, please refer pairing with a mobile phone connected to the steps of the method, the second phone After a successful connection will voice prompt "; phone to connect 2"; 4) when the second and Bluetooth hands-free mobile phone has successfully connected After, open the first mobile phone's Bluetooth feature, you can see the first phones will be prompted to do and BT Speaker connections, select the connection, then the two mobile phone while connected to a Bluetooth hands-free a. Bluetooth hands-free phone can connect to two phones connected to the latest Chinese voice prompts handsfree pairing, the speakerphone will always stay connected with your phone. (1) After the speakerphone off, boot again, hands-free phone connection will automatically restore the state, while hands-free voice prompt "; 1 to turn off the phone."; (2) handsfree distance is more than the effective distance, free When lifting the phone will automatically disconnect, hands enter the effective distance range in 10 points, handsfree automatically restore the connection status and voice prompts "; phone 1 to connect"; Bluetooth hands-free phone can be connected to two Chinese mobile phone voice prompts newest disconnect the phone and hands-free connection when you want to use another Bluetooth hands-free phone connection, disconnect the phone and the paired handsfree connected by the following methods. (1) Hands-free off (2) from the phone's Bluetooth menu in the "off" connection Note: After handsfree speakerphone disconnect short bright blue lights flash, hands-free phone is disconnected after 10 minutes for Free mention automatic shutdown. Bluetooth hands-free phone can connect to two phones latest Chinese voice prompts use the speakerphone (1) to answer the call: When a call comes in, hands-free speaker issued a ringing tone and voice prompt "; the phone 1 Dial"; Short Press the "MFB" button to answer a call. If your phone is automatically answer the call state, you do not have to press "MFB" button to answer a call, because it will automatically turn Bluetooth hands-free access to our car. (2) Hang up the phone: When the speakerphone during a call state, short press "MFB" button to end the call. You can also reject normal mobile phone button to reject a call. This method is also suitable for the operation when two mobile phones simultaneously connected. (3) to reject the call: When the phone calls, handsfree speaker issued a ringing tone, press "MFB" button for 3 seconds to reject a call. (4) re-dial phones: speakerphone in standby mode, press "MFB" button twice, speakerphone will automatically re-dial the last group pulled out of the phone. If you connect two hands-free mobile phone standby mode, short press "MFB" 2 times, it will re-dial the first and handsfree device pairing the first phone last group pulled out of the phone. Or short press "V +" button twice, it will re-dial and Bluetooth hands-free cell phone devices connected to the second last group pulled out a phone number. (5) voice-activated dialing: Handsfree In standby mode, press "MFB" button, then the speaker issued a "beep" sound, then began to utter a voice tag for voice dialing. Note: Before using voice dialing, first make sure the phone has a voice dial function, please consult the specific use of cell phone use. (6) Volume adjustment: speakerphone in a call, short press "V +" and "V-" button to adjust the volume until the volume is adjusted to the desired size, voice prompts "; the highest volume"; and "; minimum volume "; (7) Transfer Talk: A. Go handsfree phone: speakerphone during a call state, short press"; MODE "; key, hands-free voice calls will be transferred to the phone, B. transferred to the hands-free phone : Short Press "MODE" button to transfer voice calls from the phone to the hands-free Note: This function depends on the phone smooth application compatibility, does not apply to sections of the phone at (8) low voltage state. flashing red shift about every 3 after 30 seconds, automatic shutdown protection. Bluetooth hands-free phone can connect to two phones Chinese voice prompts the latest second phone call. When the above two mobile phones connected, the first Bluetooth hands-free cell phone use is a priority function, the second phone is secondary 1) Voice dialing: Press the "V +" activate the phone voice dialing function, 2) Reallocation: Double-click the "V +" call back the second one connected to the phone number of the last outgoing call, other features please refer to the above steps to operate NOTE: double connection handsfree paired simultaneously connecting two phones, when one part of the notification, the other outside a automatically and hands-free disconnected automatically restore the connection after the call. Bluetooth hands-free phone can connect two phones Voice Chinese voice prompts latest state switching this product supports three national language of voice prompts, Chinese, English and Spanish. The factory is silent . Chinese voice if you switch the other two countries, long press "; MODE"; key for 3 seconds will be followed by a variety of voice prompts to hear, just you hear English when prompted, press MFB key tips can be recognized as English, If you hear prompts in Spanish, press MFB button to confirm the prompts in Spanish. Bluetooth hands-free phone can connect to two phones latest Chinese voice prompts to restore the factory settings if you need a hands-free return to the factory settings, all hands-free The match will be deleted: (1) Ensure that the hands-free in standby mode. (2) Press "V +" key and "V-" button for 5 seconds until the speakerphone off, then the speakerphone has been restored to factory settings (do not remember any matched handsfree Bluetooth device) Bluetooth hands-free phone can be connected Two phones Chinese voice prompts the latest product specifications Bluetooth specifications --------------: Version 2.0 operating frequency range --------------: ISM2. 4GHz to2.4GHz Bluetooth Profile --------- -: Speakerphone Hands-Free Profiles transmit power --------------------: Class2 wireless range --------------: 0-10 meters Charger output specification -----------: DC5-6V 400MA built-in rechargeable battery -------- ---: 3.7V 650MA (# BL-5B) -------------- normal charging time: about 3 hours of talk time Handsfree ------------ -: -------------------- about 17 hours Standby time: about 48 hours handsfree size --------------- -: Car Bluetooth Handsfree Car kit 03: L11.5CM * W4.5CM * H1.4CM (excluding clip) Weight ----------------------- ---: Car Bluetooth Handsfree Car kit 03: 45g (without battery)