Steering wheel lateral sideslip test - single slide sliding test rig

Steering wheel lateral sideslip test - single slide sliding test rig according to the latest "safety inspection items and methods vehicles" GB21861-2014 standard, in line with national standards. 1. Equipment requirements: steering wheel lateral sideslip test should test bench sliding, sliding test station should have the tire side force release function. 2. Verify program: the car approaching the skidding amount of integrity testing center station, and the steering wheel is in the neutral position, the driving state of the following is not more than 5km / h steady speed, straight line through the sliding test station, read the maximum indication . 3. Inspection Note: When a vehicle inspection station by sliding, not transferable power steering; do not brake or parking in sideslip test bench; sideslip inspection station should be kept clean slide the lower part to prevent corrosion or block. The main technical parameters: 1, the slide stroke: inward 5mm, outward 5mm 2, measuring range: inward 0-9m / km, out 0-9m / km 3, skateboard moving force: 0.1mm slide move when <30N slide move 2.5mm <70N 4, resolution: 0.1m / km 5, Display: Pointer display 6, display error: ± 0.2m / km 7, judgment error: ± 0.2m / km 8, Working temperature: -10 ℃ ~ 45 ℃ 9, relative humidity: ≤85% 10, the maximum axle load: 6T 11, Power supply: AC220V 12, Dimensions: 1270X500X42 (mm) Board Size: 500X500X42 (mm)