Automotive brake pedal force gauge - Tractor braking force tester

Automotive brake pedal force gauge - Tractor braking force tester sales motorway tester, speed tester, five meter, fuel meter, light meter, single slide slip test stand and other traffic detection equipment. Keywords: automotive brake pedal force gauge, hand brake dynamometer brake, parking brake operating force gauge, tractor braking force tester "GB7258-2012" automobile brake pedal force meter verification requirements? Pedal power is the measurement of automobile brake pedal force value appliances, mainly by the force sensor and electrical instrumentation display device. How it works: using sensors fixed on the brake pedal will act on the brake pedal force, through electrical instrumentation is displayed on the dashboard. Zero drift: less than 2d; discrimination threshold: less than 2d; indication tolerance: ± 5%; tilt error: within 30 ° of not more than 5%; verification should be no severe mechanical vibration, electromagnetic interference environment get on. Measuring range: ≤999.9 Newton Resolution: 0.1 Newton Accuracy: 2% of the standard 9-pin RS232 interface. (3 feet signal output, 2 feet signal input, 5 feet signals). 9600 baud, 8 data bits, 1 stop bit, no parity. WTC-I-type pedal force operating force gauge, with two sets of sensors, to meet the different needs of users, without the tractor manufacturer with the handbrake sensor. Please call Zibo Micro-Electronics Co., learn more about Auto Brake pedal force gauge - Detailed pedal force operating force gauge - tractor braking force tester.