Car Power 12v turn boost inverter 1000w 220v Kai Sike

Kai Sike 1000W / 12V turn 220V boost inverter / car power inverter environment based on security and performance, the installation environment should meet the following conditions: 1. Drying: can not water or rain. 2, cool: temperature between 0 degrees and 40 degrees. 3. Ventilation: Keep housing free of foreign material within the upper 5CM other end surface ventilated. Installation Method 1, the converter switch to [OFF] position, and then head into the interior of the cigar cigarette lighter socket, plug in place and ensure good contact. 2. Make sure all electrical power before use in the nominal power following, 220V electrical plug directly into the 220V outlet converter at one end, and to ensure that the two sockets connected to the electrical power and within the nominal power. 3, open converter switch, the green indicator light is on, work normally. 4, red approved lights that due to overvoltage / undervoltage / overload / over temperature, resulting in converter is off. 5, in many cases, due to the product insert car cigarette lighter output is limited, so that the normal use converter alarm on or off, then just launch vehicle or reduce the electric power can be restored to normal. Technical Data Output voltage: 220V Waveform: square wave input voltage: 10-15V built capacity broken wire: 70A-load consumption: 12V input load current: less than 0.3A maximum power: more than 90% continuous output power: 400W 30-minute duration Efficacy: 500W Peak power: 1000W