Sprinkler sprinkler pump accessories

This series of pumps with external mixing self-priming structure, there should be an appropriate amount of liquid in the pump. After the pump is started, the impeller rotates, the impeller inlet a negative pressure within the suction pipe in the liquid mixing pump gas into the gas-liquid separation chamber through the extrusion chamber. Because of the difference in specific gravity of gas-liquid, gas separation from the liquid discharged from the outlet pipe, the liquid sinks in the gas-liquid separation chamber, the number of cycles until the suction gas tube drained and filled with a liquid, complete self-absorption process The pump starts normal infusion. Therefore, to ensure that the pump has good self-absorption properties, you must meet the following conditions: 1, before pump, the pump liquid stock must be higher than the shaft, and therefore must be connected to a pump inlet elbow bend upwards followed by a horizontal tube and quick connector, quick connector must be above the centerline of the shaft centerline 300 mm. 2, import pipeline system must ensure that no leakage. 3, suction head suction pipe must be submerged in water, in order to avoid air intake pipes. 4, the outlet pipe and the pump outlet must ensure that when connecting the straight pipe length ≥200 mm and then take bends.