Inhaled Flux drying me

Flux drying on the suction box dryer feeder, automatic solder sucked from the hopper to hold the liner in the dryer for drying, without manual loading. Equipped with dust removal device, in feeding the process can automatically remove the dust flux, and collected dust, and ensure the welding quality solder inner tubular electric heating tube dryer, reasonable distribution, temperature uniformity, liner and heating pipes are made of stainless steel, to avoid rust solder contamination when automatic temperature control, can be adjusted to the baking temperature, the temperature reaches a predetermined requirement that automatically cut off power, holding time by the amount of time relay control, the thermostat setting time, to cut off the power supply, equipped with peep holes, with random observations dryer inside the case. convenience reclaimer, just press the material handle, ie the flux after drying out from the spout, the handle that is closing off the main model and technical parameters : Model: YJJ-A-100 flux capacity: 100kg maximum working temperature: 500 ℃ suction speed: 180kg / h h temperature increase rate: 2000C / h h Temperature Time: 1-999 / min min Dimensions: 140 × 68 × 150cm Weight: 225kg flux Determination of moisture after drying 0.05% Model: YJJ-A-200 flux capacity: 200kg maximum working temperature: 500 ℃ suction speed: 180kg / h h temperature increase rate: 2000C / h h Temperature Time: 1-999 / min min Dimensions: 140 × 68 × 160cm Weight: 275kg after drying moisture flux measured 0.05% Model: YJJ-A-300 flux capacity: 300kg maximum working temperature: 500 ℃ Suction rate: 180kg / h h temperature increase rate: 2000C / h h Temperature Time: 1-999 / min min Dimensions: 140 × 68 × 180cm Weight: 325kg flux Determination of moisture after drying 0.05% Model: YJJ-A-500 Flux capacity: 500kg maximum working temperature: 500 ℃ suction speed: 180kg / h h temperature increase rate: 2000C / h h Temperature Time: 1-999 / min min Dimensions: 150 × 70 × 200cm Weight: 400kg drying Determination of water content of 0.05% after the solder Keywords: Flux drying me, Flux oven, inhaled Flux drying me