Could Italy TEC.MO Tektronix high-frequency plasma cutting technology

Introduction: Non-high-frequency plasma cutting technology has been well received by the customers, in Europe and the United States, non-high-frequency plasma power supply has become a standard configuration. Its clean arc way around appliances and in less interference with the CNC machine tools supporting software and systems to reduce interference, but also more and more get the domestic user acceptance. Bottleneck with the domestic plasma cutting power technology matures, restricting plasma cutting industry on the highlights out. Excellent plasma power often due to a defect in the torch lost their competitive edge, so that customers tend to believe that the power of technical problem or immature technology. Welding Technology Co., Ltd. Zhuhai Rundong from Italy Tai Kemo (TEC.MO) the introduction of advanced plasma cutting guns and supplies, the successful solution of the problems in this regard, and greatly improve the domestic plasma cutting power advantage. ? Italy Tai Kemo PT / ST series of non-high-frequency technology and features: 1. arc technology: This series of tip arc method using a Tai Kemo's patented technology, the electrode to the nozzle, by global patent protection. When the pressure is transmitted to the larger tip, pressure prompted electrode later upgrade 3.5-4mm, then contacted Arc: A: Arc-starting patented reduced during the course of the pilot and consumables wear; B: electrode to cut a short distance from the Arc-mouth and improve the success rate of arc; C: reduces the risk of electric shock in the tip or handle internal cables arcing time, especially in a highly humid environment; D: gun does not require the head and handle any special internal cable insulation material, so that the gun layout more simple and economical; 2. Cooling: double air cooling is used in the road, greatly improving the life of the supply; 3. Current range: 25A-130A, the world's largest non-power high-frequency plasma cutting gun, much to solve the plight of domestic cutting power supply 100A-120A does not cut gun; 4. Interface Type: can be divided into domestic 1 / 4G interface, the standard European Interface and P-max1650 interfaces, greatly improving the applicable rate of the product; 5. Scope: A: Hand Gun: PT25 / PT40 / PT60 / PT80 / PT100 / ST-120, 25A-130A applicable manual plasma cutting; B: machine gun: PTM-100, 60A-80A is suitable for mechanized plasma cutting; STM-120, 100A-130A is suitable for plasma cutting machine; 6. Supplies swap: ST / STM-120 Series and P-max1650 Supplies are completely interchangeable; 7. Market share: 80% of the non-high-frequency plasma cutting torch is provided by TEC.MO, in China, PT25 / PT40 / PT60 series supporting the use of products in large quantities, up to 5000-7000 / year ; 8. authorized users: ST / STM-120 and global brands OEM cooperation, and supporting the use of P-max1650, has been recognized by users worldwide, has become a global classic gun. ? Welding Technology Co., Ltd. Zhuhai Rundong all my colleagues uphold the concept of perfection, adhere to the principle of innovation in the field of welding and cutting efficiency with our friends to work together to create brilliant! For more information, please visit www.zhrd.net ?? or call: 0756-2616360?