SUPER-MIG (plasma --MIG) hybrid welding system

Super-MIG welding is a new method, Super-MIG system is a plasma arc welding and gas metal arc welding (GMAW) process combined hybrid welding processes. It combines plasma welding and MIG welding (GMAW arc welding) of two mature standard welding processes under various conditions groove, can maintain a high welding speed, deeper weld penetration, reduced heat input the amount. Compatibility: the host and torch apply (compatible) most conventional MIG welding system. Core technology: plasma arc guide MIG arc formed "KEY-HOLE", wire filled, increased penetration and improve the (welding) speed. Greatly pricey factory production efficiency and economic benefits. Five advantages compared to the traditional hybrid welding system MIG welding process 1, welding faster (faster than conventional MIG welding 2-3 times) 2, can be used for continuous pure lap welding, wire welding / spot welding combinations 3, due to the heat-affected zone narrow and difficult to deformation caused by parts 4, cleaner welding process - significantly reduced spatter 5, when welding the same material, Super-MIG hybrid welding higher quality (followed by the MIG, tungsten inert gas welding and plasma welding ) Comparison of groove: 16mm thickness Super-MIG only bilateral unilateral bevel 10 °, submerged single port required slope 40 °. Compared to submerged arc welding, SUPER beveling reduction, effective control of machining costs and can significantly reduce the amount of wire filling. Only wire filling amount, probably more than it saves about 70% submerged.