KA-HE8 track positioning for all position welding carriage

KA-HE8 is rack and pinion driven in orbital welding equipment running, it is widely used in the horizontal and vertical butt weld butt welding, especially for welding plate. By adjusting the position and angle of the torch to be carried out corner welding, horizontal welding and overhead welding. Car body, a swing device, the control panel as one can walk the top edge welded track. Track with powerful magnets suck on the workpiece, easy installation and removal. 2. Features 1) KA-HE8 can achieve vertical welding, welding a variety of transverse and horizontal position welding welding. 2) has a linear oscillating function. Swing mode, swings, swing speed, swing around the center position and swing dwell time and other parameters can be adjusted. 3) with a digital display car speed. 4) swing welding in order to prevent undercut and insufficient welding phenomenon, swing set stop time adjustment. 5) When the welding torch stops automatically revert to weld the center position. 6) crater with automatic function. 7) has a current and voltage regulation and wire inching function. 8) has a quick return function. 9) Standard configuration provides 1.5m long track. Track miniaturization in weight easy to move, you can extend the use of docking.