Hebei HT-01 flux recycling machine conveyor

Flux recovery conveyor machine (HT-01) Introduction This machine is designed for the welding center or difficult weldment design. It can be configured to import or domestic vacuum air pump assembly is required while external power supply and 0.4-0.6Mpa compressed air. The machine through the manual control box operation, the remaining unmelted welding flux recovered from welded directly to the inside of the machine, after strong magnet separating solder in the solder iron will be placed into the machine feeding mechanism, and then by the air pressure processing within the solder good transport to the handpiece of the small hopper. Small hopper automatically put flux on welding work, insufficient solder warning light automatic alarm, this time to be added to the machine solder flux guarantee uninterrupted delivery. In order to achieve recovery, feeding, cutting cycle. The machine can be flat on the floor or hung on a cross manipulator arm, to be equipped with two stainless steel tubes (not included) the flux circulation more smoothly. Welcome customers call to pass order.