Zhejiang, one for gate hoist gate; Jinhua gate; Hoist gate

Gate. Iron gate. Hoist. Hand hoist Main widely used in municipal, petroleum, chemical, power plants, metallurgy, coal, light industry, food, pharmaceutical, water, sewage treatment and other water supply and drainage projects. Of the nominal pressure 0.1Mpa or less in the pipe outlet and the intersection with pit wells, silt, the water channels, the original station wells mouth, clean water tank, etc., to off, or adjust the water level to clear the water. And with manual, electric, hydraulic hoist supporting the use of combination to achieve on-site operation or remote centralized control, but also joint control with the computer. Our products rational structure, reliable performance, range, quality inspection by the water conservancy department, the technical indicators are up to industry standards. Xin Yang Jizhou City Water Machinery Plant structure and absorbing foreign advanced technology, and a design to improve drainage and sewage treatment ideal equipment. The gate of the manufacturing process in line with the Ministry of Construction CJ / T300-1992 standards and the American AWWA standards. The main products are (a) screw hand hoist 3T-30T: Hand interlocking type, fully enclosed 0.3-5T, screw-side rocking 0.5-5T, flashlight dual screw hoist 3T-100T ( Single, twin-lift). (B) QPQ, QPK, QPG, QHQ single hanging, double hanging point, mobile hoist winch 6-100T. (C) the iron gate, high-pressure cast iron gate, ductile iron gates, nickel-chromium alloy iron gate, inlaid copper iron gate, shoot the door, tidal doors, steel gates, stainless steel gates and the like. (Iv) a variety of rubber sealing joints and rubber bands, winch hoist, iron gate, screw hoist. Before the gate installation, first check all bolts loose joints is caused due to the transport loading and unloading, if loose should be tightened. 2, only the water check the main frame and the horizontal frame stand on whether there is link dislocation, dislocation if the loose bolts will adjust the water stop in the same plane. 3. Installation of gates should be installed in place with the overall ban gate frame, the shutter split installation, to prevent deformation of the gate frame.