Submersible pump water pump factory direct Specifications

QJ series of wells with submersible pumps is our self-developed vertical single suction multistage submersible pumps. Pump and motor as a single entity, into the water to work, this series is a major tool for deep well pump water for urban and rural areas, industrial and mining water and agricultural irrigation. QJ pump guide housing and the guide housing for the screw connection, bearing rubber bearing, the impeller positioned as a sleeve. Conditions of use: pump inlet immersed dynamic water level should be at least 3m below the bottom of the motor from the bottom of not less than 5m, well be honest. At the same time satisfy the conditions: 1, the water temperature is not higher than 20 ℃; 2, solid content in water (by weight) of not more than 0.01%; 3, pH 6.5-8.5 pH value of the water; 4, water, sulfur compound content of not more than 1.5 mg / l; 5, water and chloride ion content of not more than 400mg / l. Service Response: 1, the user must provide notification service received after 1 hour reply within 24-48 hours to reach the designated location to provide services. 2, to provide users with technical advice, related technical information, on-site supervision of installation, free training technical personnel. 3, quality problems in the quality of the product warranty period itself, we are responsible for proper handling. 4, confirmed by both parties caused by the failure of the product user responsibility, I will actively cooperate with treatment, to help solve, and strive to meet the reasonable demands of users.