Sprinkler factory direct JP75-300 mobile winding irrigation machine irrigation and drainage equipment

Winding irrigation machine is mainly composed of chassis, reel, PE pipe, water turbines, gearboxes, speed compensation means and water traffic composition. Production of very high-tech machine, the level of its key components processing water turbine, gearbox, PE pipe The quality and structure of a direct impact on the effect of the machine and operating life. Works winding irrigation machine: the host irrigated land put to an end; the use of traction of the wound on the host pipes and water pipes connected to the driving of drag to the other end of the land; then on the water and work up to a certain pressure, so the car by gun or spray boom began to farmland water; at the same time, a host of water using water pressure through a turbine, gearbox and drive train work to produce certain mechanical kinetic energy starts to rotate reel; rotating driven end of the reel block pipes to the host end rewind direction. This form of reels in rotation, and water traffic at a set uniform speed walking back, walking side edge water, until the completion of irrigation throughout the land, when the position of the car to walk to the host, the host can lift car and fixed on the host, then the entire irrigation process is completed, shut off the water, the device can be carried into the next block another irrigation. Global brand JP75-300 mobile winding irrigation machine technical parameters 1.PE tube length × diameter: 300m × 75mm 2. Maximum control with a long: 300m above 3 nozzle flow: 13-38m3 / h 4. pressure into the machine: 0.35-1.0MPa 5. Nozzle diameter: 14-24mm 6. water weight: 2400KG 7. Weight without water: 1550KG 8. car containing nozzle length: 5300mm 9. Maximum width: 2050mm 10. Total height: 2660mm 11. without sprinklers the length of the car: 3650mm 12. Host Wheelbase: 1500-1800mm 13. Host tire model: 7.00-12 14. Host tire pressure: 0.35MPa 15. ground clearance: 280mm 16. Traction board standard height from the ground: 500mm 17. Minimum height from the ground traction plate: 235mm 18. Wheels nozzle distance: 1500-2800mm 19. Supporting power: 13kw 20. Configure pumps: 200QJ32-91 (minimum diameter 200mm, 32m3 / h, head 91m,)