Electro-hydraulic machine price of diesel crack Slap Slap split hydraulic machine manufacturers

Electro-hydraulic machine price of diesel crack Slap Slap split hydraulic machine manufacturers hydraulic rock Slap Slap crack crack crack Slap machine electro-hydraulic machine diesel hydraulic Slap Slap cracked concrete cracking machine hydraulic splitting machine hydraulic Slap Slap crack machine principle is to use the middle crack gun wedge stretch, pushing surrounded wedge block to around two pops open, thus opening an internal swelling rock. Use of the time you need to play in the first division of the rock a diameter 40-50 mm depth of 50-100 cm deep holes, then insert a gun pops crack, start the machine, about 10-15 seconds, a split rock namely 100 centimeters length, crack width of 1.5 cm. Slap crack machine works: the ultra-high pressure oil pump station output drive cylinder produces more than 800-1000 tremendous impetus, and after mechanic amplification can be split split object in a predetermined direction. Slap crack machine compared with the traditional mode of operation, it has a simple structure, easy operation, high efficiency, low cost, safety, energy conservation, energy management and a series of advantages. Slap split machine for secondary breaking of large ores, it is an ideal product to replace secondary blasting and manual breaking. Slap crack machine features; splitting process no vibration, no shock, no noise, no dust, complete split within a few seconds, the largest single division force of up to 800 tons, high working efficiency, control division, dismantling, split precise size, light weight , simple operation, easy maintenance and narrow space in the indoor demolition work can be used for underwater construction. Slap split hydraulic machine production efficiency: hydraulic pressure pump crack rock and pops up to 55 a 63MPa, pops component by tongues gradually applied to the cell wall, big and uniform, is still tension, rock separating surface is relatively smooth; no manual hit wedges, reduce labor intensity. Taiwan 5 0t excavator hammer one day broken stonework according to 5 ~ l O cube. Per day for the cost of conversion (plus fuel, flat transition costs) of 150 to 200 yuan / cubic meters. Taiwan split machine Slap Slap .. one day can crack 4 O ~ 7 0 cubic meters. Daily conversion costs (salaries, light truck rental costs, picks fees, expenses compressor, generators and fuel consumption, etc.) is 4 to 10 yuan / cubic meters. Taiwan pops crack machine 40 to 70 cubic meters per day. Taiwan 5 0t breaker is 5 ~ l O cube. Slap crack speed is 7 to 8 times the speed of crushing, greatly shorten the construction period. This machine is simple to use, a worker will be able to complete the entire operation, the structure is a high-pressure pipeline pumping stations plus Slap crack gun connected, when in use on the need to split the rock hit a 50-100 cm deep holes, Then insert pops crack gun, start the machine, about 30-60 seconds, namely stone split crack about a 100 cm length, 1.5 cm in width. Slap principle is to use the machine gun in the middle of the wedge crack stretching, pushing surrounded wedge block to around two pops open, thus opening an internal swelling rock. On average, a high-pressure pump station can be connected 3-5 Slap crack gun, pipeline connections within 25 meters can guarantee the normal operation pressure hotline: 13,686,028,898 15,728,719,720 Xu Xiao Hu QQ: 3182307104 Humen Town, Dongguan City, hair-run Machinery Co., Ltd.