Italy OLI pneumatic vibrator

S Series pneumatic vibrator - Ball type ??? The product line capable of producing up to 580HZ vibration frequency (> 35,000 rpm), applicable to transport, move any powdery substance work. S Series pneumatic ball vibrators mounted on the wall of the container, through self-generated vibration can effectively prevent the transport of materials bridge, rat holes like fouling occurred, and effectively improve the material on the work table of moving smoothly. ??????? S Series pneumatic vibrator - Ball type consists of an aluminum alloy housing, ball and special high hardness circular motion orbit. The operation of the product will need to install dual-port valves as well as compressed air filtration. Maintenance Working temperature: 0 ° C to 200 ° C (32 ° F to 390 ° F) without lubrication high acceleration (start) centrifugal force, large amplitude small air consumption and low noise certification standards ATEX ExII3D TYPE: S8 / S10 / S13 / S16 / S20 / S25 / S30 / S36 OR series pneumatic vibrator - roller type ?? OR pneumatic vibrator roller with its high vibration frequency, high vibration strength, with reduced friction or even eliminate friction material characteristics. Meanwhile, the vibrator resonance is totally insensitive. ??????? The product through the rotor on the track running irregular vibration energy, high vibration frequency, vibration force characteristics. Our products and services need to install dual-port valves as well as filtered compressed air. ??????? OR pneumatic roller vibrator as a flow aid tool can work in bins, hoppers, to prevent the bridge, rat holes like jam production. In addition, the product can also be applied to feed, separation, tamping, screening and filtering work. Eight different models to choose from the maximum operating temperature: 200 ° C (390 ° F) without lubrication high acceleration (start) centrifugal force, large amplitude low noise air consumption small maintenance ATEX ExII3D standard certification Type: OR50 / OR65 / OR80 / OR100 OT Series Pneumatic vibrators? - OT series turbine type pneumatic turbine vibrators combine the high vibration frequency, large amplitude characteristics. Product Run to install dual-port valves as well as compressed air filtration. The product line maintenance, no lubrication, can effectively help material transport in the hopper, conveyor belt bench. ??????? Vibration of the product produced by the turbine operation. During operation, OT series can produce high-frequency vibrational energy. Even when working at low pressure air stream can also produce a large amplitude. Our products and services need to install dual-port valves as well as filtered compressed air stream. Proof Operating temperature: 0 ° C to 200 ° C (32 ° F to 390 ° F) without lubrication high acceleration (start) centrifugal force, large amplitude low noise air consumption small maintenance ATEX ExII3D standard certification TYPE: OT-8 / OT-10 / OT-10S / OT-13 / OT-16 / OT-16S / OT-20 / OT-25 / OT-25S / OT-30 / OT-36 / OT-36S P Series Impact Pneumatic vibrators P Series Impact Pneumatic vibrators can have a strong impact, particularly suitable for adhering to the funnel, shake the pipe material, transportation, can effectively eliminate or prevent pipe arch-shaped hard shell and rat holes to plug. Vibration P Series Pneumatic vibrators produce a strong impact shock by linear vibration, pressure can be adjusted by changing the amplitude and frequency to meet the work requirements of different applications. P series pneumatic impact vibrator has a perfect start \ stop operation control, any position start vibrating, large amplitude, small air consumption, maintenance-free, adjustable amplitude frequency characteristics. Apply to pipelines, hoppers and silos, dust and the like. Normal operating temperature limit: 200 ℃ high temperature operating temperature limit: 400 ℃ Compressed air pressure: ≤0.6bar TYPE: P25 / P40 / P60 K series piston pneumatic linear vibrator built-in built-K series pneumatic piston vibrators in a straight line vibration, frequency and amplitude can be continuously adjusted in the direction. Product design and lightweight, can be installed in any orientation, start \ stop mode with selectable, can means that the stop, and have no lubrication, high-impact, low air consumption, low noise and other special K series linear pneumatic vibrator special for solid material transport, tap and separate work, apply to empty the hopper, drive the transportation of materials, feeding on to achieve the best results. Normal operating environment temperature: -20 ℃ ~ 130 ℃ Compressed air pressure: ≤0.6bar Certification: ATEX ExⅡ3D TYPE: K15 / K22 / K30 / K45 / K60 F series linear pneumatic piston vibrators External External pneumatic piston F series In addition to the linear vibrator K series all functions and features, can be adjusted by increasing the weight of the frequency and amplitude of the vibration to suit different occasions, and even in the work of the vibrator, the frequency and amplitude can be continuously adjusted. Can be applied to the feeder, vibrating plate, vibration sieve, hopper and other normal operating environment temperature: -20 ℃ ~ 130 ℃ Compressed air pressure: ≤0.6bar Certification: ATEX ExⅡ3D TYPE: F15 / F25 / F40 / F85