Stainless steel thin cylinder

Hydraulic system actuators: Usually by the cylinder, the cylinder rod (rod), piston and seals composed by the piston inside the cylinder is divided into two parts, namely through a hole. The compression ratio of the liquid is very small, so when one hole into the oil, the piston will be pushed to make another hole oil, piston rod drive do extend (retract) movement, and vice versa. Today's technological advances, industrial development has been towards "Automation, technology, humanity" simply can not meet the needs of automated circuit industry, this company produces and sells hydraulic cylinders, hydraulic system, from the fuel tank selection, design and maintenance can meet the requirements of customers in the use and solve the customer's problem is our goal, we will be happy to serve you, work together to promote development of industrial automation and work hard! Minimum five members to say it: 1- 2- cylinder and cylinder head piston and rod seals 4- 3- 5- buffer means exhaust. Each cylinder works are almost similar, take a manual jack, the jack in fact, is the most simple cylinder. By manually pressurized stalk (hydraulic hand pump) hydraulic oil into the cylinder through a one-way valve, then into the cylinder of the hydraulic oil because of the individual valve can no longer reverse back, forcing the cylinder rod up, and then continue to work the hydraulic oil continue to enter the cylinder, so constantly on the rise, to fall when the hydraulic valves open, the hydraulic oil back to the tank, this is the most simple works, the other is based on the improvement in the cylinder with the cylinder basically the same principle.