Shaker 10

Shaker Description: Shaker Shaker for selected other fine materials gravity separation equipment, primarily for 2-0.02 mm ore and sludge levels of iron, manganese, gold, tungsten, lead, tin, chromium, titanium, Change bed after appropriate article type; bismuth, tantalum and other non-ferrous metals, ferrous metals and rare metals minerals roughing, selection, sweep the election, such as different processing operations; in addition, there are sorting in 4-0.02 mm pyrite sorting end of coal and slime, as well as sorting other hybrid material has a sufficient difference in specific gravity and particle size composition of sorting coarse sand, fine sand, sludge and other materials of different size. Shaker structures and classification: Shaker mainly by the bedside, motor, the accent slope, the bed, the mine shafts, sinks, bars and lubrication systems to complex eight-part longitudinal bed depending on the location of the mine shaker shaker can be divided into the right and left two forms shaker. The right to mine the location shaker for shaking institutions on the right, left and then to the mine location shaker on the left. Shaker performance and features: Using the shaker is the sorting of minerals difference in specific gravity, the differential motion bedside offered, ramps flow and different forms of bed bar group loosely layered mineral particles in the bed surface, selective transport, the bed surface into a fan belts, which outputs different wealth products. Shaker beneficiation process is to tilt the bed surface with a complex of the conducted group mineral particles from the bed surface angle into the mine shafts, while the lateral flushing water supply to the sink, so mineral particles in gravity, horizontal water impact, the bed for reciprocating motion under the influence of the asymmetry resulting inertia and friction, stratified according to the proportion and size, and for longitudinal movement along the bed surface and lateral movement along the inclined bed. Thus, the proportion and size of different mineral particles along their direction of motion gradually from A to B side fan side was shed, were discharged from different areas of the concentrate and tailings end side, and finally is divided into concentrate, middlings and tail Ore. Reciprocating motion by a crank rod transmission mechanism to achieve. Motor through the belt drive pulley driven by the crankshaft rotation so large rocker along for the upper and lower movement, the downward movement of the joystick, push the rear axle brackets and reciprocating rod is moved backward, the spring is compressed bed seat and back and forth through the linkage rod connected, so this time also make the bed for backward movement, when the rocker upward movement, due to the tensile force of the spring, driven forward movement along the bed. Zhengzhou Yanwu Machinery Manufacturing Co., Ltd. is committed to perennial crusher, sand making machine, ball mill and other processing equipment, quartz sand production line development, production and sales of sand manufacturers, crusher manufacturers, sand making equipment and crushing equipment They include: jaw crusher, crushing machine, impact crusher, impact crusher, energy saving ball mill, cone ball mill, cement mill, rotary kiln and other equipment. Zhengzhou Yanwu Machinery Co., Ltd. Tel: 0371-86661052 Fax: 0371-86661051 QQ: 1031096 Alibaba: yanwujx Email: zzsusu@163.com URL: www.ywposuiji.com