Centec mortar spraying machine is simple user satisfaction

 GLP-3Ⅱ mortar spraying machine GLP-3Ⅱ mortar spraying machine, GLP-3Ⅱ mortar spraying machine Supply, GLP-3Ⅱ mortar spraying machine manufacturers GLP-3Ⅱ mortar spraying machine is introduced: Mortar spraying machine is mainly used in building exterior walls, cement mortar spraying and spraying mortar external wall insulation materials, refractory spraying. GLP-3Ⅱ mortar spraying machine features: GLP-3Ⅱ mortar spraying machine does not fall ash, water, materials, can greatly reduce costs, simple operation, without scaffolding, without moving the device, do not take the crop patches, Yin and Yang angle, roof all can free spray, high speed, high efficiency, low labor intensity, a spraying machine 3 cubic meters per hour can be easily sprayed area. A machine that can spray mortar, waterproof coatings, refractory materials, environmental conditions and from areas and spraying surface shape. The machine is a high-voltage electrical screw mortar spraying machine, advanced technology, operation and maintenance is simple, no special training can be skilled operators. The main parameters of GLP-3Ⅱ mortar spraying machine: Model GLP-3Ⅱ (or yimei, jx03 type) Voltage 380V power 7.5KW delivery flow 3 m3h maximum pressure 4MPA conveying distance transport height of 20m by 50m diameter <5mm grain buckets of 50 L GLP -3Ⅱ mortar spraying machine operating rules: 1. Boot to add water into the hopper, adjust the speed to high speed in order to achieve the effect of wet pipe run, only a short run, and then the water drained. 2. Stir the material into the hopper, then the host pipe and spraying nozzle outlet and locking. 3. Before opening the spray, first Phoenix gassing to 8kg pressure pump (matches phoenix pump 0.26-0.36m) and then connected to the nozzle. 4. Turn on power at gunpoint hopper, adjust the speed of the wind pressure and speed to achieve the best atomization state so far, kept stopping wind. 5. After commissioning accurate, immediately move the nozzle and spray jets construction site work. 6. the construction process, the pipeline is full coating, is not suitable for stopping too long, if the power outage, you should immediately dismantle pipe cleaning. 7. If the filling pressure in the pipe, tube cleaning before the demolition, must cover with a cloth, to protect their eyes to avoid injury. 8. If the power fails, first check whether the burned drill should be replaced immediately. 9. cleaning work or completion of the body, should not wet the drill or electric tank water to avoid damage. 10. After work every day, you should clean the hopper, pipes, nozzles, nozzle and a rotary joint must be cleaned thoroughly, in favor of tomorrow work 11. If work after a period of time, perceived paint outlet did not force, will have to replace the pressure pump Pu. 12. suddenly do not send material in their work, while the motor is still working to prove that the nozzles plug hole, should immediately stop cleaning the nozzle, and then continue working. 13. The nozzle is a loss (including the changing pressure pumping) standard nozzle hole is 4mm, and the atomizing nozzle hole is not ideal, it should immediately replace the nozzle.