Swedish SKFLGEV2 calcium-based grease, LGEV2 overloading, low speed, LGEV2 as severe ..

Swedish SKF LGEV 2 calcium-based grease, LGEV2 heavy load, low speed, LGEV2 provide excellent protection for the severe vibration SKF full range of grease Monopoly SKF grease LGMT2 | LGMT3 | LGHP2 | LGHB2 | LGEP2 | LGEM2 | LGEV2 | LGWA2 | LGWM1 | LGWM2 | LGGB2 | LGFP2 | LGLT2 | LGET2 | LGBB2 | LDTS1 Details, details, contact: 15300538529 / 021-56551215 transfer 8016 Contact: Connaught with solid lubricant SKF high viscosity bearing grease with solid lubricants over High viscosity bearing grease LGEV 2 SKF LGEV 2 is mineral oil as the base oil lithium - calcium grease. It contains a lot of molybdenum disulfide and graphite, and high viscosity oils, provide excellent protection for heavy-duty, low-speed and severe vibration and so on. Very suitable for the lubrication of high load and low speed large-size spherical roller bearings, sliding trace situation may occur. Excellent mechanical stability and good water resistance and corrosion resistance Typical applications: support roller and thrust roller bucket wheel excavator slewing bearing heavy duty roller press trunnion bearing on the rotary drum kiln and dryer on Crusher technical parameters Order LGEV 2 / (Packing) DIN 51825 Code KPF2K-10 NLGI consistency class 2 = Soap Type Lithium / calcium Colour Black base oil type mineral oil Operating temperature range -10 to +120 ° C (15 to 250 ° F) Dropping point DIN ISO 2176> 180 ℃ (> 355 ° F) base oil viscosity of 40 ° C, mm2 / s 100 ° C, mm2 / s BS 200 / S penetration: DIN ISO 2137 60 strokes, 10 -1 mm 100 000 strokes, 10-1 mm maximum 1.4 Mechanical stability Roll stability, at 100 ° C in 72 hours, 10-1 mm V2F test R biggest 'M' corrosion resistance: - ISO 11007 standard - Erosion test - saline test (100% seawater) 0-0 0-0 * 0-0 * DIN 51807 / 1,90 ℃ under three hours R biggest DIN 51817,40 ℃ under 7 days, static, 1-5% copper corrosion DIN 51 811, 110 ° C 100 ° C (210 ° F) maximum 1 EP performance wear scar DIN 51350/5, 1 400 N, mm 4- ball test, welding load DIN 51350/4 maximum 1.4 minimum optional package 3000 Specifications 35 g tube 420 ml tube 5, 18, 50, 180 kg * Typical Value