Rotary cleaning machine, rotary cleaning machine price, rotary cleaning machine specifications

Rotary cleaning machine main purposes: rotary cleaning machine fixedly mounted at the inlet pumping stations, power plants, inverted siphon and other hydraulic structures, rotary cleaning machine in order to intercept the flow of trash rack entrained dirt matter (branches, leaves, weeds, garbage, ice, etc.) and by its rotating tooth harrow groan on the deck, with a belt conveyor or otherwise transported, to avoid harmful contaminants into the water conduit, ensure unit or other equipment and structures running smoothly. Simple rotary cleaning machine structure, machine rigidity, smooth operation, easy to fault, easy operation and maintenance, good clean-up effect, high efficiency, low energy consumption, long life. Features: Rotary cleaning machine is the Trash and raking combined into one continuous decontamination equipment fixed. Rotary cleaning machine is mainly composed of the gate body, raking rake (rake teeth), composed of three parts of the transmission system; according to catchwaters bottom soil conditions, sometimes at the bottom of the gate body additional auxiliary gate. How it works: the drive mechanism is disposed in the upper part of the left or right side of the gate. Sprocket gear output shaft, driven by a chain drive sprocket driven axle group on the driven sprocket by security devices will torque to the axle shafts, shaft drive two traction sprocket rotation, so Traction roller chain plate rotation, mounted between the two traction chain rake will immediately purge chain rotation. As each finger is inserted into the grid surface to a depth of dirt so the gate is forced to face with the tooth rake movement, when the tooth rake to a gate at the top of the body, traction chain commutation, tooth rake also will be turned over, this When the rake dirt off to work on the deck or belt conveyors and other facilities, it is sent deck. Transmission: Transmission are: electric motors, planetary cycloid reducer, drive sprocket, drive chain (sleeve roller chain), axles and other components. Axle group consisting of a driven sprocket, drive shaft, traction sprockets, roller chain plate, bearing left and right adjustment and overload protection mechanism. Zhang against the motor drive chain seat slide and adjusting bolt adjustment. Supported about adjusting the traction sprocket shaft ends with a plate bearing bracket roller chain engages the roller chain around the guide rotation. In order to synchronize the two roller chain tensioners, set about adjusting the adjusting screw bearings. Technical parameters Main technical parameters hole Jingkuan (b) m Clear width of culvert (b) m 1.5-8.0 gate body tilt angle (°) Slope angle of railings 65 ° -90 ° design head difference m Design stages of water m 1 -4-irons center distance mm Centre distance between railings mm 20-160 maximum purge capacity t / h Maximum dust clearing capability t / h 15-45 chain swing speed m / s Rotary speed of gangway chain m / s 0.1 tooth harrow work Width m Work width of toothed harrow m 1.2-7.5 Reducer Power Retarding machine Power 2.2-4 vertical mounting height (h) m Vertical mounting height (h) m 3-16 welcomed the letter calls, negotiate business! Contact: Exposing Tel: 18660761551 QQ: 1158104619 Want: zhongmeigk2010 mail: zhongmeigk201@163.com Address: No.88 Xinyuan Road, Jining City Development Zone in Shandong Province