Xuzhou, Jiangsu submersible drilling rig

 Submersible drilling rig always has some disadvantages in use, some of these shortcomings device quality problems, some caused by the improper operation. When the drill hole when the problem occurred, the maintenance is too much trouble, resulting in schedule delays. So submersible drilling rig operator must have a working knowledge of the principles, and properly deal with common faults. Submersible drilling rig approach must be smooth, "until you are ready skids, tools, etc. drill with skids elevate the wheels and adjust the frame in a horizontal position, after turning the power to start the motor, raise the mast, the mast lifting the bottom screw mast bearing bearings, then lever frame legs, the degree of human installation, and adjust the regulator screw rod, anchor. submersible drilling rig rope drum roll tool to draw from the impact of the beam guide wheel and the tension wheel again to the top of the mast of the drilling pulleys and sagging, its ultimate rope sockets and drilling tools. mud drum rope at the top of the mast sheaves and sagging mud, mud one end connected to the shaft tube. submersible drilling rig auxiliary drum using three fixed pulley the bottom of the mast. For more information, please visit submersible drilling rig www.yantuojx.com