Shandong activated carbon exhaust treatment equipment manufacturers, waste gas treatment, environmental waste gas treatment project

SafeNet environmental desulfurization and denitrification processes --CAFTL new desulfurization and denitration reaction mechanism for flue gas desulfurization and denitrification technology traditional exposed large investment, large area, high operating costs, difficult to deal with waste after the catalyst, the system easy to scale, sacrifice boiler thermal efficiency and other issues, technology developed double dielectric barrier discharge plasma desulfurization and denitrification technology. Since the boiler flue gas sulfur oxides, nitrogen oxides opposite through desulfurization and denitration equipment demonstrated by the nature, desulfurization and denitrification can only step by step. Boiler flue gas dust removal system from SafeNet out environmental waste gas treatment experts, into the double dielectric barrier discharge plasma activation reactor leading domestic waste gas treatment equipment, flue gas sulfur dioxide is produced by the system a lot of electrons, ions, free radicals and other activated sulfur dioxide molecules charged, improve the reactivity. Depending on the absorber, the technical department for customers design implementation. SafeNet environmental protection - painting equipment exhaust gas treatment approach: (1) an exhaust gas treatment spray water spray method: your company currently curtain painted cabinets, indoor spraying has been preconditioned primary gas treatment, which works by the Water spraying gas, the exhaust gas or the water-soluble component part of large particles to settle, part of the purpose of gas separation and clean contaminants. But there are still some gas in the water-soluble ingredients or large particles are discharged from the top floor. Although this method is affordable, but not all, mist, but can not achieve the effect of odor removal. (2) direct spray combustion exhaust gas treatment: the use of auxiliary fuel such as gas or oil heat released by burning the mixed gas is heated to a certain temperature (700-800 ℃), resides a certain time, so that the combustion of the combustible gases. The process is simple, less investment in equipment, but power consumption, high operating costs. However, this method is suitable for the high concentration of small wind exhaust gas treatment, your company is not suitable for low concentration, high winds amount of organic waste gas treatment. (3) to smell carbon adsorption method using adsorption microporous activated carbon adsorption of organic waste is one of the most effective means of industrial processes. Activated carbon adsorption bed with new columnar activated carbon, the activated carbon surface area and porosity, adsorption capacity, has good mechanical strength, chemical stability and thermal stability, the purification efficiency up to 95%. Such as the use of two-time adsorption bed gas treatment, the organic waste gas by contact with activated carbon, organic pollutants in the exhaust gas is adsorbed on the surface of activated carbon, which was spun off from the gas stream to purify effect. Exhaust air from the activated carbon adsorption bed reached emission standards, air can be discharged directly. Shandong activated carbon exhaust treatment equipment manufacturers, waste gas treatment, environmental waste gas treatment project provided by the Shandong Environmental Protection Technology Co., Ltd. SafeNet. Shandong Environmental Protection Technology Co., Ltd. SafeNet (www.caftec.com.cn) strong, credible, Shandong Weifang exhaust gas treatment equipment and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shandong Environmental Protection Technology Co., Ltd. SafeNet into the brilliant and you work for a better future!