Hai Bearings Bearing _ bearing Figure _3305AZTN

Linqing Hai Bearing Manufacture Co. double row angular contact ball bearings, has many years of experience in the production of Xinjing Li for you on the double row angular contact ball bearing installation: by heating the angular contact ball bearings or bearing, the use of thermal expansion of the tight fit into a song with the installation method. This method is suitable for a large amount of interference bearing installation, before the thermal loading the bearing or separable bearing rings into the tank uniform heating 80-100 ℃, then remove from the oil loaded onto the shaft as quickly as possible in order to After cooling to prevent the inner face and the shaft shoulder fit is not tight, it can then fasten the rear bearing axial cooling. When the bearing outer ring and light metal bearing tight fit, using heat bearing hot charging method, can be avoided with the surface by scratches. Linqing Hai Bearing Manufacturing Co. (http://www.hrtzc.com/) specializing in the production of double row angular contact ball bearings, double row deep groove ball bearings, automobile wheel hub bearings, automobile air-conditioning compressor magnetic clutch bearings, agricultural machinery square hole Bearings, LR5 Series double row angular contact roller bearings. Double row deep groove ball bearings mainly refers to installation and adjustment factors, use and maintenance, repair and other maintenance meets the technical requirements. According to the bearing installation, use, maintenance, maintenance of the technical requirements for operation of the bearing to withstand load, speed, temperature, vibration, noise and lubrication condition monitoring and inspection, abnormal immediately find reasons to adjust to normal.