Packed Tower Design

Separation performance of structured packing column internals depends, namely fillers, distributors, collectors, etc. Also it depends on many parameters, such as gas load, liquid load, material properties, operating pressure, liquid filler wetting properties and the like uneven distribution. So far not by the geometry of the filler to accurately calculate the column separation performance data needed to determine the precise conditions under different theoretical and experimental packed column by column. The user can determine the size and needs of the tower packing height based on the information in order to approximate the degree level. If you need reasonable and economical form of structure, I would like to plant in close cooperation with users. Changzhou stainless steel casting http://www.gjgcjx.com 1: 1, structured packing 2, the support grids 3, liquid collector 4, drip ring 5, a multi-stage liquid distributor trough 6, the packing pressure ring 7, supporting grid 8, the steam inlet pipe 9, bottom 10, to the reboiler circulation pipe 11, the skirt 12, this structure is suitable base ring diameter greater than or equal to 800mm of a packed column. Figure 2: 1, structured packing 2, the support grids 3, liquid collector 4, the downcomer 5, the liquid distributor tube structure is adapted to a diameter less than 800mm packed column.