Huainan Hotels 5 tons air heat pump hot water system price

Huainan Hotels 5 tons air heat pump hot water system price host installation (1) Do not install in a high-frequency facilities, so as not to affect the normal use of the control function; (2) Do not install in soot, so as not adhering air fumes side heat exchanger fins, affecting energy savings; (3) the unit can be mounted on the exterior walls, roofs, balconies, ground; outlet should avoid the wind direction; (4) the installed base or mounting brackets must be strong, firm, which should can withstand the weight of the unit operation; in the region appears strong wind (typhoon), or should be used when the unit requires a fixed expansion bolts M10 X 100 as a fastener unit to prevent the unit running shaking or unnecessary mechanical noise, make sure the unit running smoothly; (5) If the canopy should prevent the unit due to the air-side heat exchanger from external environment affect heat transfer, pay attention to ensure that their heat, cooling unhindered; (6) unit condensate drain should take soft pipe water to the sewer or drain; when (7) is mounted to prevent air intake and exhaust to produce heat cycle, simultaneously, air vents should retain some headroom, if space is not enough, you must install the exhaust pipe will lead the cold air timely lead; when (8) Recommendation units need to be installed at the foot padded rubber pads to make shock and noise canceling process. Huainan Hotels 5 tons air heat pump hot water tank installed system price 1, Huainan Hotels 5 tons air heat pump hot water system tank insulation should be installed in the price range of 2.5 meters from the hosts. With a heat pump can be installed outdoors as a balcony, roof, floors, can be installed indoors. Storage tank installation must sit underneath the pad of 10cm feet, installations solid foundation, must bear the weight of 500Kg, not hanging on the wall. 2, near the water storage tank, and water pipes and hot water pipes interfaces with a valve on the interface. Note: The power outlet must be grounded! Waterway connection: 1, the check valve / pressure relief valve is connected to one end of the water pipe, and the other end connected to the tank inlet to take over. Note: The storage tank outlet must be connected to some 1.5 meters above PPR pipe. 2, filled with water: Turn the water inlet valve and open the faucet hot water pipe. Begin water until the tap water overflow side to fill, close the faucet. Storage leak, to ensure watertight. Note: The first time you use the front unplugged must ensure that the insulation has been filled with water in the tank.