Professional Fennikezi pool dehumidification heat pump 40kg

1, high energy efficiency ● The unit uses the triple technology, at a constant temperature + dehumidification operating mode, up to 10 or more comprehensive energy efficiency, energy saving effect is very significant. 2, heat recovery technology ● unit with full heat recovery technology, the air dehumidification process, the pool water into the atmosphere heat recovery to heat the air in the pool hall or swimming pool water than conventional thermostat dehumidification savings scheme More than 40% of the energy. 3, super anti-corrosion design 1) efficient titanium heat exchanger plate heat exchanger ● within the tube are all selected titanium metal, corrosion strong energy, fully guaranteed service life of the unit; ● pool water circuit and the refrigerant circuit using Book double countercurrent flow arrangement to ensure that the degree of supercooling outlet refrigerant, improve system efficiency. 2) anti-corrosion technology ● electrophoresis equipment all brass aluminum finned air heat exchanger can be selected as a whole electrophoresis embalmed, anti-corrosion coating plump, uniform, smooth, smooth, high hardness, strong adhesion, corrosion resistance, impact resistance and other advantages. 3) independent dual-chamber device isolation design ● design, using a wind chamber and dual chamber device independent chamber design, the internal pool with wet and corrosive air and heat pump system is completely isolated to prevent corrosion of parts air heat pump system to ensure the system can be a long and stable operation. 4) food-grade stainless steel applications ● equipment air cavity wall can be selected SUS304 food grade lumber, effective way to eliminate internal pool with corrosive moisture and air to the inner wall of the etching equipment. 4, cabinet optimized design ● unique three-dimensional composite aluminum alloy frame, with the latest double insulation composite sandwich panels; avoid energy losses due to thermal bridges and leaks caused by condensation phenomena and crew outer wall, and eliminate air infiltration system untreated. 1) Frame ● Frame Assembled unit body with a unique three-dimensional composite composed of aluminum profiles cold bridge break. ● T6 aluminum profiles with high-quality extrusion rate sum fixed mold made of hardened and frosted surface, excellent mechanical strength, dimensional accuracy and aesthetic appearance. ● between the inner and outer aluminum profiles Use unique PVC plastic profiles cold bridge cut off and filled directly within a rigid high density polyurethane foam insulation materials, further enhance thermal performance and mechanical strength. ● frame corner joints using 3D plastic castings, aluminum profiles and assembled into the overall framework, the mechanical strength of the load CEN2 standard. 2) panel ● New thicker double insulation composite sandwich panel consists of color plate, galvanized sheet and intermediate rigid polyurethane foam insulation material integrally molded frame with PVC plate edge of the partition between double cold plate and aluminum frame Bridge. In all aspects of thermal insulation, sound insulation, fire protection, strength, life and cleanness have the best performance. ● panel mounted on the aluminum frame screws tightened by both internal and external pressure of the two pressing process, the strength of the box, flatness and better air tightness. 5, air system optimization design 1) Motor ● Motor is fully enclosed air-cooled three-phase asynchronous motors, protection class IP55, F class insulation, with higher reliability and service life. ● Standard equipped with power to: 380V / 3P / 50Hz 2) fan ● Fan can be divided into two kinds of left-handed and right-handed rotation mode, and can be made 0 °, 90 °, 180 °, 270 ° four kinds of the wind direction. ● chassis with galvanized steel plate, side plate having aerodynamic shape, inlet overall stretch forming, welding or snail plate with side plates integral way intersection. ● fan for the double inlet, forward or backward after centrifugal fan. Forward multi-blade impeller made of high quality galvanized steel plate, the blade is designed to meet the particular aerodynamic shape, makes the most efficient, lowest noise. Riveting claw blade is fixed to the end of the disc and ring, operating at maximum power contact, impeller with sufficient stiffness. Backward impeller on high-quality cold-rolled steel plate, welded blade design according to three-dimensional flow management through CNC machining in the plate and end rings. ● All impellers are strictly static balance in the factory, balancing and collect balancing test. 3) The unit is equipped with aluminum dampers closed off more Yefeng manual volume control valve, according to need can be equipped to form electrically adjustable. 4) filter ● unit equipped with a standard filter for the plate early efficiency filters, with rugged, long life, can be repeatedly cleaned features. All filters are installed in the standard slot rack, or on both sides of the access door is equipped with the following, to facilitate routine inspection and replacement of disassembly. ● Also according to the special needs of users, but also can provide a full range of various grades of high efficiency filter. 5) ● Independent suspension damping system damping system makes quieter fan and the motor is running, reducing the noise caused by air turbulence caused. ● an overall bearing fan and motor base, and according to the distribution of the various parts of the bearing, the corresponding configuration of different types and numbers of shock absorbers to avoid beating, anti-vibration and resonance, so that the fan and motor run more smoothly. ● fan and housing construction using the flexible connection is isolated, to avoid vibration transfer.