Shanghai Songjiang High floor dedicated and reliable quality high-pressure rubber joints

High-pressure rubber joint structure can be divided according to loose flange type high-pressure rubber joints and integrated flange-pressure rubber joints. Is a highly flexible, high air tightness, chemical resistance and weather resistance of vibration and noise reduction pipe joints, people also call it soft joints, shock absorbers throat. First, the loose flange high-pressure rubber joints: It is made of colloidal and two loose flange formed. Colloid by the inner and outer layers of synthetic rubber, nylon cord skeleton, pressurized steel ring, using gas blow molding process through high temperature vulcanization system to do. Its original use pressure 1.0Mpa ~ 1.6Mpa (mechanical molding making) to 2.5Mpa ~ 4.0Mpa, especially in corrosion, acid, oil pipeline can show its special effects, increase the service life. Second, a high-pressure rubber joints flange body: it is made of colloidal and two flanges through a special process, the use of gas blow-molding process, and then after high temperature vulcanized made of. Its use pressure increased from 1.0Mpa ~ 1.6Mpa to 2.5Mpa ~ 6.0Mpa, especially connected to the outlet valve in the pipeline and the pipeline have foundation settlement, to prevent pull-off is its unique features, extending the use of rubber joints life, giving users the unexpected benefits. It features a small size, light weight, good flexibility, easy installation and maintenance. Second, the installation can generate axial, lateral, warp, angular displacement, from the user the heart barrier pipe, flanges, not parallel to the limit. Third, the work can reduce structure-borne noise, strong vibration absorbing capability. Fourth, with a special synthetic rubber high temperature, acid, oil, chemical corrosion-resistant pipeline is the ideal product. Model classification high-pressure rubber joints can be divided by type: JGD-type single ball loose flange high-pressure rubber joints, JGD-A Dual ball loose flange high-pressure rubber joints, JDX Reducing loose flange type high-pressure rubber joints, KDF broadside loose flange type high-pressure rubber joints, JGD-B-type rubber connector threaded. Technical requirements, high-level water use this product, must have a fixed pipe bracket, otherwise the product should install anti Rato devices. Fixed support or bracket force must be greater than the axial force, otherwise it should install anti Rato devices. 2, you can choose to use the work according to their own pipeline of pressure: 2.5Mpa, 4.0Mpa flexible rubber joints, connection size Refer to "flange size table." Shanghai rubber joint: www.jiuhu007.com Shanghai waterproof casing: www.shfstg.com