CS-type heat pipe expansion joints compensation expansion joint expansion joint compensator manufacturers supply

Pipeline expansion and contraction due to temperature change phenomenon, pipeline thermal expansion deformation by cold shrink broken, in order to avoid damage to the pipeline of this phenomenon called thermal compensation. Usually the added compensator spool, the line due to temperature changes or shortened elongated parts, the main waveform compensator bellows and the two heat pipes utilized. Link pipe expansion joints of the main flange connection, welding, two Buried expansion joints (non-trench, set up well when installed) commonly used welding. Pipe expansion joints has a good overall performance, it is widely used in chemical, construction, water supply, drainage, oil, light and heavy industrial, refrigeration, sanitation, plumbing, fire protection, electric power and other infrastructure projects. Installation Notes: 1, release the pressure plate bolts before installation, the installation of expansion joints to stretch the length of the diagonal law then tighten the bolts, do not press bias. 2, CS heat pipe expansion joints should be installed in a straight section of the pipeline between the two mounting bracket, in order to ensure the normal telescopic expansion joints and to prevent pull-off, should not guide bracket and file member. 3, heat pipe expansion joints of high-quality steel, heat pipe expansion joints temperature is 150 ℃ -300 ℃. Heat pipe expansion joints pressure range of 1MPa, 1.6MPa. 4, the installation should be preceded by heat pipe expansion joints loosen the pressure plate bolts, thermal expansion joints after installation length by pulling the diagonal method Tighten the bolt plate, not the pressure side, then the connection ends of the product. 5, thermal expansion joints should be installed in a straight line between two fixed brackets on the pipe to prevent the pull-off.