Chongqing automotive panel die springs Shelf

Samson mold spring identification method, appearance, color contrast mold spring color to distinguish between the value of the size of the force, and to prevent the spring surface rust. However, each brand is slightly different water-soluble powder processing Samsol use, the surface color is matt sky blue 2, verticality verticality, the longer service life; verticality of accuracy depends on grinding technology, Samsol used CNC grinding wheel up and down simultaneously, and the gap between the grinding wheel is gradually reduced to spring standard lengths discrimination: horizontal scrolling ground, observe whether the linear motion. 3, end of the first lap tangent circles identify the site (flat), led by a wide circle (tangent parts of lobes) is relatively small tail ring; when by lifting angle affect the direction of the force toward the end of lap lifting angle is the first lap at the beginning of the helix angle produces deformed (can be measured according to the angle with the horizontal circle) to upgrade the smaller the angle of the segment less stress and longer life. 4. Compare the total number of laps each brand due to the different processes, the total number of turns of the same size are different by design affect the total number of laps, the total number of turns of the relatively thin material thickness of the material more than the total number of turns, the main purpose is to achieve JIS force value standards. 5, diameter, material shape (cross-sectional area) three loose spring-sectional edge slightly chamfered; width and thickness of the wire 6 will also have differences, touch than three loose spring after the touch of a whole feel more smooth, chamfered at the outer edge through