Split electromagnetic flowmeter

Products: split electromagnetic flowmeter: electromagnetic flowmeter in the structure can be divided into two kinds of split and one-piece, split electromagnetic flowmeter sensor and converter to independently structure, the sensor installed in the pipe, the converter can be 200m away from the sensor is installed within the premises; integrated electromagnetic flowmeter sensors is the main structure of the converter mounted on sensor integrated. After the conversion of electromagnetic flowmeters or 220V50Hz 24VDC power supply is turned on, providing low-tristate constant excitation current excitation to the sensor through the cable, when the conductive fluid (measured medium) flows through the sensor, a flow sensor generates a signal via the signal cable transmission to the converter, after the converter process may display the instantaneous flow rate (m3 / h) and the cumulative flow (m3), while the converter output standard signal 4-20mADC, 0-2KHz be via RS-485 and PC computer communications. (A) the technical characteristics of electromagnetic flow meter split: split electromagnetic flowmeter sensors with a three-state wave excitation system, unique electrode design advanced constant magnetic field, under high pressure, can be self-sealing, choose a variety of electrode materials to ensure measuring all kinds of media require sensor Hajime smooth without blocking part, lining corrosion, insulation, high temperature, excellent wear resistance. This series of electromagnetic flowmeter converter uses the latest international electronic devices, small signal processing amplifier with a low noise, high impedance input impedance reached 1015, while the use of large scale integrated circuits and microprocessors, advanced software , highly intelligent. Split juice electromagnetic flow stable and reliable, high precision, the preset parameters and measurement parameters of power and automatic protection, and long-term storage, simple infrared remote man-machine dialogue operation, the converter has a good interchangeability, NV2118D Series Electromagnetic the meter can be widely used to measure a variety of conductive liquid. Measurement Features (ii) split electromagnetic flowmeter: 1) measurement is not affected by fluid density, viscosity, temperature, pressure and electrical conductivity change. No 2) measuring tube activity and blocking parts, no pressure loss, non-blocking, measure the liquid containing fiber, solid particles and suspended matter. 3) The instrument reflecting the sensitivity, wide measuring range, flow rate = 0.2 ~ 10m / s, conductivity> 5us / cm conductive liquid can be measured, measuring range can be arbitrarily selected. 4) The instrument uses a three-state low frequency square wave excitation technology, advanced small signal processing technology and software technology, so the anti-jamming, high precision, stable and reliable. 5) The instrument is not affected by the flow direction, forward and reverse installation can be measured. 6) electrode and the lining material corrosion resistance and abrasion resistance excellent electromagnetic flowmeter, long life and according to user specific -1: conditions require the production of electromagnetic flowmeters. Plow producing diving electromagnetic flowmeter. 7) the instrument seal, high and low voltage conditions are extremely reliable occasion, users can request the production of diving-type electromagnetic flow juice. Simple 8) meter structure, easy to install, less demanding on the straight sections. Impact 9) of the instrument, good vibration resistance. 10) The instrument can not measure the gas and non-conductive liquid.