Self-acting thermostatic valve, automatic temperature control three-way valve, copper three-way valve

Shanghai Li Shield Self-thermostatic valve | automatic temperature control three-way valve | pressure fluctuations in copper-way valve 1. The original design of the valve chamber, effectively solved the course of hot and cold water pressure changes, temperature changes caused by changes in water temperature and flow changes, and effectively amplifies the hot and cold water pressure ratio. 2. spool using nano-materials design, to avoid the hot water through the valve core and the formation of scale, the sensitivity of the product to ensure long-term use, greatly extending the life of thermostatic valves. 3. antifouling spool valve body design to maximize the reduction of particulate impurities due to siltation caused by the blockage, only rely on hot and cold water erosion, sewage discharge will immediately warm water, reducing the failure thermostatic valve due to the emergence of objective environmental impact . The valve chamber additional security settings prevent the occurrence of thermostatic valve during cold burns and accidents. 5, internally provided with a check valve to prevent hot and cold water suddenly string. Automatic temperature control three-way valve works installed in the valve body at the sensitive memory alloy mixing water temperature sensor sensing the water temperature, the temperature sensor elongation or contraction regulate the flow of hot and cold water, the temperature of the water flowing out of the thermostat setting to achieve the effluent purpose, so that a single tube with heated water into reality. Self-acting thermostatic valve installation and use instructions should be thorough cleansing of the pipeline 1. Before installing the thermostatic valve, the elimination of debris inside the pipe. Note that hot water to mark (red / H then hot, blue / C then cold water), hot and cold water, do not reverse 2. When installing thermostatic valves. Note 3. Install pressure, temperature and other parameters are consistent with thermostatic valves. 4. When the hot and cold water pressure is greater than 5: 1, shall be fitted with pressure relief valve or balancing valve. 5. shall ensure that the commissioning of water higher than fifty percent more than the rated flow thermostatic valve. 6. When the thermostat adjustment handle clockwise rotation higher and higher temperatures; counterclockwise adjust the temperature getting lower and lower.